SOFT JAWS POINTED - 3/32" x 90° Serrations
FOR USE ON: SMW Autoblok, Forkardt, Rohm, Pratt Burnerd & Other Chucks
- 3/32" x 90° serrations
- Supplies maximum concentricity on finish turning operations
- Can be bored or turned to fit workpiece
- Steel jaws can be hardened
- Available flat ended or pointed for smaller diameter parts
- Special orders available
- Available in Aluminum & Steel
Critical Dimensions | ALUMINUM | STEEL | ||||||||
Group No |
Groove Width G |
Screw Size E |
Hole Space D |
Height Inch A |
Hole to Front J |
Width Inch C |
Length Inch B |
No. of Holes |
POINTED END Part Number |
POINTED END Part Number |
I3-100-138 | 1.004 (25.5mm) | 20mm | 1.380 (35mm) | 2.50 | 3.500 | 2.50 | 6.50 | 2 | FK-16250AP | FK-16250P |
ROHM KFD 400- 500-630 |
2.50 | 3.500 | 2.50 | 8.00 | 3 | FK-16251AP | FK-16251P | |||
4.00 | 3.500 | 2.50 | 6.50 | 2 | FK-16400AP | FK-16400P | ||||
4.00 | 3.500 | 2.50 | 8.00 | 3 | FK-16401AP | FK-16401P | ||||
I3-100-156 | 1.000 (25.5mm) | 3/4 | 1.562 (39.5mm) | 3.00 | 3.250 | 2.50 | 6.50 | 2 | SM-16300AP | SM-16300P |
SMW Autoblok ALD-400, BB 500-ES, BB 630-ES |
3.00 | 3.750 | 2.50 | 8.00 | 3 | SM-16301AP | SM-16301P | |||
4.00 | 3.250 | 2.50 | 6.50 | 2 | SM-16400AP | SM-16400P | ||||
5.00 | 3.250 | 2.50 | 6.50 | 2 | SM-16500AP | SM-16500P | ||||
5.00 | 3.750 | 2.50 | 8.00 | 3 | SM-16501AP | SM-16501P | ||||
I3-100-175 | 1.000 (25.5mm) | 3/4 | 1.750 (44.5mm) | 3.50 | 7.460 | 2.50 | 10.00 | 2 | FK-25350AP* | FK-25350P* |
5.00 | 7.460 | 2.50 | 10.00 | 2 | FK-25500AP* | FK-25500P* | ||||
I3-110-162 | 1.102 (28mm) | 3/4 | 1.625 (41.5mm) | 3.00 | 3.630 | 3.50 | 6.75 | 2 | SM-20300AP* | SM-20300P* |
3.00 | 5.880 | 3.50 | 9.00 | 2 | SM-20307AP* | SM-20307P* | ||||
5.00 | 3.630 | 3.50 | 6.75 | 2 | SM-20500AP* | SM-20500P* | ||||
5.00 | 5.880 | 3.50 | 9.00 | 2 | SM-20507AP* | SM-20507P* | ||||
I3-118-250 | 1.181 (30mm) | 1.00 | 2.500 (63.5mm) | 3.00 | 4.250 | 3.50 | 8.00 | 2 | SM-24300AP | SM-24300P |
5.00 | 4.250 | 3.50 | 8.00 | 2 | SM-24500AP | SM-24500P | ||||
3.00 | 7.000 | 3.50 | 11.00 | 2 | SM-24301AP | SM-24301P | ||||
5.00 | 7.000 | 3.50 | 11.00 | 2 | SM-24501AP | SM-24501P | ||||
I3-118-275 | 1.181 (30mm) | 1.00 | 2.750 (70mm) | 3.50 | 4.500 | 3.50 | 10.00 | 2 | SM-40350AP* | SM-40350P* |
5.00 | 4.500 | 3.50 | 10.00 | 2 | SM-40500AP* | SM-40500P* |