Value Collection - 3/16" Thick x 36" Wide x 10' Long Blue Closed Cell Silicone Foam Rubber Roll - Stock Length, Plain Back, -100°F to 500°F

Item #: 32176349
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Material	Silicone Foam
Thickness (Inch)	3/16
Width (Inch)	36
Length Type	Stock Length
Length (Feet)	10
Backing Type	Plain
Color	Blue
Foam Structure	Closed Cell
Maximum Temperature (F)	500.000
Minimum Temperature (F)	-100.000

$498.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 3/8" Thick x 36" Wide x 10' Long Black Closed Cell Buna-N Foam Rubber Roll - Stock Length, Plain Back, -30°F to 200°F

Item #: 32166928
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Material	Buna-N Foam
Thickness (Inch)	3/8
Width (Inch)	36
Length Type	Stock Length
Length (Feet)	10
Backing Type	Plain
Color	Black
Foam Structure	Closed Cell
Maximum Temperature (F)	200.000
Minimum Temperature (F)	-30.000

$471.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 3/16" Thick x 36" Wide x 10' Long Red Closed Cell Silicone Foam Rubber Roll - Stock Length, Plain Back, -100°F to 500°F

Item #: 32184343
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Material	Silicone Foam
Thickness (Inch)	3/16
Width (Inch)	36
Length Type	Stock Length
Length (Feet)	10
Backing Type	Plain
Color	Red
Foam Structure	Closed Cell
Maximum Temperature (F)	500.000
Minimum Temperature (F)	-100.000

$503.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Dotco - 1/4" Collet, Straight Handle, Air Die Grinder - 30,000 RPM, Rear Exhaust, 0.3 hp, 90 psi, 1/4" Inlet

Item #: 60312071
Brand: Dotco
Model #: 12L1080-36
Exact Tooling IR#: 04

Product Specifications
Collet Size (Inch)	1/4
Handle Type	Straight
Speed Range (RPM)	25,000 - 49,999 RPMs
Exhaust Location	Rear
Speed (RPM)	30000
Horsepower	0.30
Air Pressure (psi)	90.00
Air Pressure (kPa)	620.53
Inlet Size (Inch)	1/4

$399.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Climax Metal Products - M8 Thread, 1-5/8" Bore Diam, 96mm OD, Shaft Locking Device - 7 Screws, 28,741 Lb Axial Load, 3.78" OAW, 1.969" Thrust Ring Width, 1,946 Ft/Lb Max Torque

Item #: 64650047
Brand: Climax Metal Products
Model #: C600E-162
Exact Tooling IR#: 04

Product Specifications
Thread Size	M8
Bore Diameter (Inch)	1-5/8
Bore Diameter (Decimal Inch)	1.6250
Outside Diameter (Decimal Inch)	3.7800
Outside Diameter (mm)	96.0000
Thrust Ring Width (Decimal Inch)	1.969
Overall Width (Decimal Inch)	3.7800
Axial Load Lbs (Pounds)	28741
Maximum Torque (Ft/Lb)	1946
Number of Screws	7.000
Screw Seating Torque (In/Lb)	264.000

$425.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - Replacement Filter Element - 14-1/2" High x 14-5/8" Wide, For Use with Air Intake Filters

Item #: 80127269
Brand: Made in USA
Exact Tooling IR#: 04

Product Specifications
Type	Replacement Filter Element
For Use With	Air Intake Filters
Width (Inch)	14-5/8
Height (Inch)	14-1/2
Maximum Cubic Feet Per Minute	1800
Filter Media	Polyester

$478.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Deschner - 3" Stroke Length, 5 Lb Min Operating Force, Standard Linear Motion Speed Controller - 13.87" OAL, 1,200 Max psi, 135°F Max

Item #: 46900106
Brand: Deschner
Model #: 1002T-31-3
Exact Tooling IR#: 04

Product Specifications
Speed Type	Standard
Stroke Length (Inch)	3
Minimum Operating Force (Lb.)	5.000
Overall LengthInch	13.870
Load Capacity Lbs	1200.000
Maximum Working Temperature (F)	135.000

$593.92

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 120.1mm L x 63mm W x 25mm H, Self Lubricating Standard Ball Carriage - 21.5mm Overhang, M6 Hole, 7059 Static Capacity

Item #: 08922726
Brand: Thomson Industries
Model #: 511H20A0L
Exact Tooling IR#: 04

Product Specifications
Type	Self-Lubricating Standard Ball Carriage
Block Length (mm)	120.10
Block Width (mm)	63.00
Block Height (mm)	25.00
Hole Size	M6
Block Overhang (mm)	21.50
Static Load Capacity (Pounds)	7059.00

$413.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 120.1mm L x 44mm W x 25.5mm H, 36mm Transverse Hole Spcg, 32mm Lateral Hole Spcg, Self Lubricating Narrow Ball Carriage - 12mm Overhang, M5 Hole, 7059 Static Capacity

Item #: 08922791
Brand: Thomson Industries
Model #: 511H20C0L
Exact Tooling IR#: 04

Product Specifications
Type	Self-Lubricating Narrow Ball Carriage
Block Length (mm)	120.10
Block Width (mm)	44.00
Block Height (mm)	25.50
Transverse Hole Spacing (mm)	36.00
Lateral Hole Spacing (mm)	32.00
Hole Size	M5
Block Overhang (mm)	12.00
Static Load Capacity (Pounds)	7059.00

$413.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Deschner - 3" Stroke Length, 5 Lb Min Operating Force, Slow Linear Motion Speed Controller - 13.87" OAL, 1,200 Max psi, 135°F Max

Item #: 46900882
Brand: Deschner
Model #: 1004T-31-3
Exact Tooling IR#: 04

Product Specifications
Speed Type	Slow
Stroke Length (Inch)	3
Minimum Operating Force (Lb.)	5.000
Overall LengthInch	13.870
Load Capacity Lbs	1200.000
Maximum Working Temperature (F)	135.000

$593.92

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 500mm OAL x 45mm Overall Width x 40mm Overall Height Roller Rail System - 105mm Between Holes

Item #: 35523869
Brand: Thomson Industries
Model #: 521H45A+500
Exact Tooling IR#: 04

Product Specifications
Overall Length (mm)	500.0000
Overall Width (mm)	45.0000
Overall Height (mm)	40.00000
Hole Spacing (mm)	105.00

$365.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1/5 hp, ODP Enclosure, Auto Thermal Protection, 1,100 RPM, 277 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 48 Frame, Resilient Base Mount, 3 Speed, Ball Bearings, 1.0 Full Load Amps, B Class Insulation, CCW Lead End

Item #: 87957700
Brand: US Motors
Model #: 9957
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	ODP
Horsepower	1/5
Thermal Protection Rating	Auto
Name Plate RPMs	1100
Voltage	277
Frequency Hz	60
Frame Size	48
Mount Type	Resilient Base
Number of Speeds	3
Bearing Type	Ball
Full Load Amperage	1.0
Insulation Class	B
Full Load Efficiency Rating	62.10
Motor Run Capacitor Micro Farid	7.50
Motor Run Capacitor Volts	0
Service Factor Rating	0.00
Motor Rotation	CCW Lead End
PSC Code	6105

$380.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Parker - 3/4" Port, 10.95" High x 3.62" Wide Heavy Duty Filter with Metal Bowl, Manual Drain - 270 SCFM, 250 Max psi, 175°F Max Temp, Sight Glass Included, Modular Connection, 18 oz Bowl Capacity

Item #: 81752115
Brand: Parker
Model #: P3NFA96GSM
Exact Tooling IR#: 04

Product Specifications
Port Size (NPT)	3/4
Height (Decimal Inch)	10.950
Width (Decimal Inch)	3.6200
Bowl Material	Metal w/Sight Glass
Drain Type	Manual
Standard Cubic Feet Per Minute	270
Maximum Working Pressure (psi)	250
Maximum Temperature (F)	175
Micron Rating	40
Bowl Capacity	18 oz.
Minimum Temperature (F)	32
Includes Sight Glass	Yes
Modular Connection	Yes
Filter Media	Plastic
Bowl Guard	No
Type	Heavy-Duty

$415.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Parker - 1" Port, 10.95" High x 3.62" Wide Heavy Duty Filter with Metal Bowl, Manual Drain - 300 SCFM, 250 Max psi, 175°F Max Temp, Sight Glass Included, Modular Connection, 18 oz Bowl Capacity

Item #: 81752123
Brand: Parker
Model #: P3NFA98GSM
Exact Tooling IR#: 04

Product Specifications
Port Size (NPT)	1
Height (Decimal Inch)	10.950
Width (Decimal Inch)	3.6200
Bowl Material	Metal w/Sight Glass
Drain Type	Manual
Standard Cubic Feet Per Minute	300
Maximum Working Pressure (psi)	250
Maximum Temperature (F)	175
Micron Rating	40
Bowl Capacity	18 oz.
Minimum Temperature (F)	32
Includes Sight Glass	Yes
Modular Connection	Yes
Filter Media	Plastic
Bowl Guard	No
Type	Heavy-Duty

$344.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 2 hp, ODP Enclosure, Auto Thermal Protection, 3,450 RPM, 230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 48 Frame, Thru Bolt with Base Mount, 1 Speed, Ball Bearings, 10.5 Full Load Amps, F Class Insulation, CCW Shaft End

Item #: 87959672
Brand: US Motors
Model #: SPH20FLC1
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	ODP
Horsepower	2
Thermal Protection Rating	Auto
Name Plate RPMs	3450
Voltage	230
Frequency Hz	60
Frame Size	48
Mount Type	Thru Bolt w/Base
Number of Speeds	1
Bearing Type	Ball
Full Load Amperage	10.5
Insulation Class	F
Full Load Efficiency Rating	80.90
Motor Run Capacitor Micro Farid	0.00
Motor Run Capacitor Volts	0
Service Factor Rating	1.00
Motor Rotation	CCW Shaft End
PSC Code	6105

$403.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1.5 hp, ODP Enclosure, Auto Thermal Protection, 3,450 RPM, 230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 48 Frame, Thru Bolt with Base Mount, 2 Speed, Ball Bearings, F Class Insulation, CCW Drive End

Item #: 87956686
Brand: US Motors
Model #: AGH15FL2CS
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	ODP
Horsepower	1-1/2
Thermal Protection Rating	Auto
Name Plate RPMs	3450
Voltage	230
Frequency Hz	60
Frame Size	48
Mount Type	Thru Bolt w/Base
Number of Speeds	2
Bearing Type	Ball
Insulation Class	F
Full Load Efficiency Rating	53.30
Motor Run Capacitor Micro Farid	0.00
Motor Run Capacitor Volts	0
Service Factor Rating	1.00
Motor Rotation	CCW Drive End
PSC Code	6105

$403.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Bando - Section C, 4" Wide, 258" Outside Length, V-Belt - Neoprene Rubber, Black, Classic Banded, No. C255

Item #: 11255767
Brand: Bando
Model #: 4C255
Exact Tooling IR#: 04

Product Specifications
Belt Style	V-Belts
Belt Section	C
Outside Length (Decimal Inch)	257.880
Outside Length (mm)	6550.15
Belt Width (Decimal Inch)	4.000
Belt Number	C255
Belt Internal Length (Decimal Inch)	255.00
Belt Internal Length (mm)	6477.00
Number of Ribs	4.000
Material	Neoprene Rubber
Belt Height	0.63
Color	Black
Style	Classic Banded
Maximum Temperature (F)	194

$702.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 445

Item #: 55463756
Brand: OSG
Model #: 445-1000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	1
Mill Diameter (Decimal Inch)	1.0000
Number of Flutes	3
Length of Cut (Inch)	1-1/2
Length of Cut (Decimal Inch)	1.5000
Material	Solid Carbide
Finish/Coating	Uncoated
Shank Diameter (Inch)	1
Single or Double End	Single
Overall Length (Inch)	4
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	45.00
Flute Type	Spiral
Length Type	Regular
Chipbreaker	No
Extended Reach	No
Series/List	445

Product Specifications

Mill Diameter (Inch) 1

Mill Diameter (Decimal Inch) 1.0000

Number of Flutes 3

Length of Cut (Inch) 1-1/2

Length of Cut (Decimal Inch) 1.5000

Material Solid Carbide

Finish/Coating Uncoated

Shank Diameter (Inch) 1

Single or Double End Single

Overall Length (Inch) 4

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 45.00

Flute Type Spiral

Length Type Regular

Chipbreaker No

Extended Reach No

Series/List 445

$338.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 16mm, 48mm LOC, 16mm Shank Diam, 115mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, WXL Finish, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute

Item #: 42586198
Brand: OSG
Model #: 37420022
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

WXL is a nano-coating that yields higher hardness and oxidation temperature versus TiAlN. It is ideal for steels and hardened steels and for non-ferrous materials. WXL is a proprietary coating exclusive to OSG Tap and Die, Inc.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (mm)	16.00
Mill Diameter (Decimal Inch)	0.6299
Number of Flutes	4
Length of Cut (mm)	48.00
Length of Cut (Decimal Inch)	1.8898
Material	Solid Carbide
Finish/Coating	WXL
Shank Diameter (mm)	16.00
Single or Double End	Single
Overall Length (mm)	115.00
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	30.00
Extended Reach	No

Product Specifications

Mill Diameter (mm) 16.00

Mill Diameter (Decimal Inch) 0.6299

Number of Flutes 4

Length of Cut (mm) 48.00

Length of Cut (Decimal Inch) 1.8898

Material Solid Carbide

Finish/Coating WXL

Shank Diameter (mm) 16.00

Single or Double End Single

Overall Length (mm) 115.00

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 30.00

Extended Reach No

$446.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 4" Diam x 3/8" Width of Cut, 10 Teeth, Carbide Tipped Side Milling Cutter - Straight Teeth, Uncoated

Item #: 73094252
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.

Carbide tips cuts faster than high speed steel. The carbide tip is brazed onto the steel head of a shank. It is commonly used on ferrous and nonferrous metals including cast iron, steel and steel alloys.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Product Specifications
Cutter Diameter (Inch)	4
Cutting Width (Inch)	3/8
Cutting Width (Decimal Inch)	0.3750
Tooth Configuration	Straight
Material	Carbide-Tipped
Finish/Coating	Uncoated
Arbor Hole Diameter (Inch)	1-1/4
Number of Teeth	10
Material Application	Stainless Steel

Product Specifications

Cutter Diameter (Inch) 4

Cutting Width (Inch) 3/8

Cutting Width (Decimal Inch) 0.3750

Tooth Configuration Straight

Material Carbide-Tipped

Finish/Coating Uncoated

Arbor Hole Diameter (Inch) 1-1/4

Number of Teeth 10

Material Application Stainless Steel

$519.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It