Bison - 8" Max Chuck Diam Compatibility, Steel 1.5mm x 60° Serrated Hard Lathe Top Jaws - 3 Steps

Item #: 30520597
Brand: Bison
Model #: 7-787-408
Exact Tooling IR#: 04

Features and Benefits

Top jaws, also known as hard or step jaws, hold a workpiece during an operation. They are reversible and are bolted onto the master jaw.

Product Specifications
Jaw Type	Top Jaws
Jaw Interface Type	1.5mm x 60 Serrated
Maximum Compatible Chuck Diameter (mm)	200.00
Maximum Compatible Chuck Diameter (Inch)	8
Maximum Compatible Chuck Diameter (Decimal Inch)	8.00
Number of Steps	3
Material	Steel
Brand Compatibility	Kitagawa
Fastener Size (mm)	M12

Product Specifications

Jaw Type Top Jaws

Jaw Interface Type 1.5mm x 60 Serrated

Maximum Compatible Chuck Diameter (mm) 200.00

Maximum Compatible Chuck Diameter (Inch) 8

Maximum Compatible Chuck Diameter (Decimal Inch) 8.00

Number of Steps 3

Material Steel

Brand Compatibility Kitagawa

Fastener Size (mm) M12

$1,154.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Metro - 2,000 Lb Capacity 4 Shelf Wire Shelving - Starter Unit

Item #: 98860976
Brand: Metro
Model #: N576C

Product Specifications
Type	Wire Shelving - Starter Unit
Starter or Add-On	Starter Unit
Number of Shelves	4
Width (Inch)	24
Depth (Inch)	72
Height (Inch)	63
Load Capacity (Lb.)	2000
Additional Information	NSF Listed
PSC Code	3990

$734.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 1, 3" LOC, 1" Shank Diam, 6" OAL, 7 Flute Solid Carbide Square End Mill

Item #: 18913236
Brand: Fraisa
Model #: H15851775

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.

Product Specifications

Mill Diameter (Inch) 1

Number of Flutes 7

Length of Cut (Inch) 3

Material Solid Carbide

Finish/Coating Duro-Si

Shank Diameter (Inch) 1

Single or Double End Single

Overall Length (Inch) 6

Center Cutting NonCenter Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 65

Variable Helix Yes

Flute Type Spiral

Chipbreaker No

Series/List Multicut XF

Product Specifications
Mill Diameter (Inch)	1
Number of Flutes	7
Length of Cut (Inch)	3
Material	Solid Carbide
Finish/Coating	Duro-Si
Shank Diameter (Inch)	1
Single or Double End	Single
Overall Length (Inch)	6
Center Cutting	NonCenter Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	65
Variable Helix	Yes
Flute Type	Spiral
Chipbreaker	No
Series/List	Multicut XF

$886.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Koma - Tool Presetter Spindle Pot

Item #: 16470478
Brand: Koma
Model #: CA-85025-00

Product Specifications
Type	Spindle Pot
For Use With	P368

$832.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - Combimaster Connection, 7mm Cutting Width, 17.6mm Depth of Cut, 63mm Cutter Diam, 6 Tooth Indexable Slotting Cutter

Item #: 96583869
Brand: Seco
Model #: 03277865

Product Specifications
Connection Type	Combimaster
Cutting Width (mm)	7.00
Cutting Width (Decimal Inch)	0.2756
Maximum Depth of Cut (mm)	17.60
Cutter Diameter (mm)	63.00
Modular Connection Size	M16
Number of Teeth	6
Toolholder Style	R335.19
Series	R335.19
Insert Style	SNHQ 1204; SNHQ 12045
Staggered Tooth	Yes
Number of Cutter Inserts	6
Cutting Direction	Right Hand
Insert Holding Method	Screw
Maximum RPM	9400
Rake	Positive
Lead Angle	90

$959.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - Combimaster Connection, 1/4" Cutting Width, 0.7047" Depth of Cut, 2-1/2" Cutter Diam, 6 Tooth Indexable Slotting Cutter

Item #: 96584214
Brand: Seco
Model #: 03277882

Product Specifications
Connection Type	Combimaster
Cutting Width (Decimal Inch)	0.2500
Cutting Width (Inch)	1/4
Maximum Depth of Cut (Decimal Inch)	0.7047
Cutter Diameter (Inch)	2-1/2
Modular Connection Size	M16
Number of Teeth	6
Toolholder Style	R335.19
Series	R335.19
Insert Style	SNHQ 1204
Staggered Tooth	Yes
Number of Cutter Inserts	6
Cutting Direction	Right Hand
Insert Holding Method	Screw
Maximum RPM	9400
Rake	Positive
Lead Angle	90

$959.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - Combimaster Connection, 6mm Cutting Width, 17.6mm Depth of Cut, 63mm Cutter Diam, 6 Tooth Indexable Slotting Cutter

Item #: 96584172
Brand: Seco
Model #: 03277864

Product Specifications
Connection Type	Combimaster
Cutting Width (mm)	6.00
Cutting Width (Decimal Inch)	0.2362
Maximum Depth of Cut (mm)	17.60
Cutter Diameter (mm)	63.00
Modular Connection Size	M16
Number of Teeth	6
Toolholder Style	R335.19
Series	R335.19
Insert Style	SNHQ 1203
Staggered Tooth	Yes
Number of Cutter Inserts	6
Cutting Direction	Right Hand
Insert Holding Method	Screw
Maximum RPM	10900
Rake	Positive
Lead Angle	90

$959.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - Extra Length Drill Bits Drill Bit Size (mm): 7.94 Drill Bit Size (Inch): 5/16

Item #: 94699378
Brand: OSG
Model #: 656031212

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, non ferrous materials, plastics, and other tough-to-machine materials.

EgiAs is a nano-multilayer coating constructed with extreme toughness, high wear and heat resistance characteristics to ensure stable and consistent tool life. Ideal for use on materials including alloys, carbon steels, cast iron and hardened steels up to 35 HRC. EgiAs is a proprietary coating exclusive to OSG.

Product Specifications

Extra Length Drill Bits; Drill Bit Size (mm): 7.94 ; Drill Bit Size (Inch): 5/16 ; Drill Bit Size (Decimal Inch): 0.3125 ; Drill Point Angle: 140 ; Drill Bit Material: Solid Carbide ; Drill Bit Finish/Coating: EgiAs

Drill Bit Size (mm) 7.94

Drill Bit Size (Inch) 5/16

Drill Bit Size (Decimal Inch) 0.3125

Drill Point Angle 140

Drill Bit Material Solid Carbide

Drill Bit Finish/Coating EgiAs

Overall Length (Decimal Inch) 15.3900

Overall Length (mm) 391.00

Through Coolant Coolant Through

Shank Diameter (Inch) 5/16

Flute Length (mm) 341.42

Cutting Direction Right Hand

Flute Length x Diameter Ratio 40xD

Number of Flutes 2

Point Type R Thinning

$918.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Legris - Air-Actuated Axial Valves Pipe Size: 2 (Inch) End Connections: FNPTxFNPT

Item #: 60526803
Brand: Legris
Model #: 4203 50 44 20

Product Specifications

Air-Actuated Axial Valves; Pipe Size: 2 (Inch); End Connections: FNPTxFNPT ; Actuator Type: Pneumatic ; Overall Length (Decimal Inch): 8.1500 ; Material: Ni-Plated Brass ; Seal Material: Viton

Pipe Size (Inch) 2

End Connections FNPTxFNPT

Actuator Type Pneumatic

Overall Length (Decimal Inch) 8.1500

Material Ni-Plated Brass

Seal Material Viton

$914.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - Extra Length Drill Bits Drill Bit Size (mm): 8.00 Drill Bit Size (Inch): 3/8

Item #: 94699311
Brand: OSG
Model #: 8717800

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, non ferrous materials, plastics, and other tough-to-machine materials.

EgiAs is a nano-multilayer coating constructed with extreme toughness, high wear and heat resistance characteristics to ensure stable and consistent tool life. Ideal for use on materials including alloys, carbon steels, cast iron and hardened steels up to 35 HRC. EgiAs is a proprietary coating exclusive to OSG.

Product Specifications

Extra Length Drill Bits; Drill Bit Size (mm): 8.00 ; Drill Bit Size (Inch): 3/8 ; Drill Bit Size (Decimal Inch): 0.3150 ; Drill Point Angle: 140 ; Drill Bit Material: Solid Carbide ; Drill Bit Finish/Coating: EgiAs

Drill Bit Size (mm) 8.00

Drill Bit Size (Inch) 3/8

Drill Bit Size (Decimal Inch) 0.3150

Drill Point Angle 140

Drill Bit Material Solid Carbide

Drill Bit Finish/Coating EgiAs

Overall Length (mm) 394.00

Through Coolant Coolant Through

Shank Diameter (mm) 8.00

Flute Length (mm) 344.00

Cutting Direction Right Hand

Flute Length x Diameter Ratio 40xD

Number of Flutes 2

Point Type R Thinning

$918.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Keo - 7" Diam x 7/8" Face Width Staggered Tooth Side Milling Cutter

Item #: 20071874
Brand: Keo
Model #: 952-002-296

Features and Benefits

Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.

Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.

Product Specifications

Cutter Diameter (Inch) 7

Cutting Width (Inch) 7/8

Tooth Configuration Staggered

Material High Speed Steel

Finish/Coating TiN

Arbor Hole Diameter (Inch) 1-1/2

Number of Teeth 28

Material Grade M2

Product Specifications
Cutter Diameter (Inch)	7
Cutting Width (Inch)	7/8
Tooth Configuration	Staggered
Material	High Speed Steel
Finish/Coating	TiN
Arbor Hole Diameter (Inch)	1-1/2
Number of Teeth	28
Material Grade	M2

$829.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Keo - 7" Diam x 7/8" Face Width Staggered Tooth Side Milling Cutter

Item #: 20071924
Brand: Keo
Model #: 952-002-292

Features and Benefits

Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.

Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.

Product Specifications

Cutter Diameter (Inch) 7

Cutting Width (Inch) 7/8

Tooth Configuration Staggered

Material High Speed Steel

Finish/Coating TiN

Arbor Hole Diameter (Inch) 1-1/4

Number of Teeth 24

Material Grade M2

Product Specifications
Cutter Diameter (Inch)	7
Cutting Width (Inch)	7/8
Tooth Configuration	Staggered
Material	High Speed Steel
Finish/Coating	TiN
Arbor Hole Diameter (Inch)	1-1/4
Number of Teeth	24
Material Grade	M2

$829.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hallowell - 2 Door, 2 Tier, Bulk Storage Lockers

Item #: 80796543
Brand: Hallowell
Model #: BSL366090R2A-HG

Product Specifications
Type	Bulk Storage Lockers
Number of Tiers	2
Number of Doors	2
Overall Width (Inch)	36
Overall Depth (Inch)	60
Overall Height (Inch)	90
Color	Gray
Opening Width (Inch)	36
Opening Depth (Inch)	60
Opening Height (Inch)	45
Number of Shelves	0
Additional Information	Un-assembled; Double Tier Locker - Add-On
Additional Information	Un-assembled; Double Tier Locker - Add-On

$864.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hallowell - 6 Door, 2 Tier, Premium Wardrobe Lockers

Item #: 65170433
Brand: Hallowell
Model #: U3588-2PT

Product Specifications
Type	Premium Wardrobe Lockers
Number of Tiers	2
Number of Doors	6
Overall Width (Inch)	45
Overall Depth (Inch)	18
Overall Height (Inch)	78
Color	Parchment
Opening Width (Inch)	12-1/4
Opening Depth (Inch)	17
Opening Height (Inch)	34
Style	3-Wide
Number of Shelves	0
Additional Information	Un-assembled
Additional Information	Double Tier Locker

$881.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hallowell - 6 Door, 2 Tier, Premium Wardrobe Lockers

Item #: 57946055
Brand: Hallowell
Model #: U3256-2A-HG

Product Specifications
Type	Premium Wardrobe Lockers
Number of Tiers	2
Number of Doors	6
Overall Width (Inch)	12
Overall Depth (Inch)	15
Overall Height (Inch)	66
Color	Gray
Opening Height (Inch)	30
Style	3-Wide
Number of Shelves	6
Additional Information	Assembled; UL Greenguard Gold Product Certified for Low Chemical Emissions UL.COM/GG UL 2818

$727.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 1/2″ Diameter × 1/4″ Shank Diameter × 3/4″ Trim Length, 0.008″ Crimped Bristle, Stainless Steel, Circular End Brush

Item #: MJ74BNF14S08
Brand: Brush Research
Model #: BNF14S08

Product Specifications
Diameter	1 1/2″
Style	Circular End
Shank Diameter	1/4″
Bristle Diameter	0.008″
Material	Stainless Steel
Trim Length	3/4″
Bristle Type	Crimped
Maximum RPM	20,000

$16.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Marson - Blind Rivets Type: Closed End Head Type: Button

Item #: 10332336
Brand: Marson
Model #: M56009

Features and Benefits

Button head fasteners have cylindrical heads with curved tops and flat bearing surfaces. They slightly protrude out of the workpiece and are used for aesthetic purposes.

Aluminum has a high strength-to-weight ratio and is wear resistant, nonmagnetic and conductive. It is easier to form and machine than steel and is naturally noncorrosive.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Blind Rivets; Type: Closed End ; Head Type: Button ; Size Code: 64 ; Rivet Material: Aluminum ; Mandrel Material: Steel ; Minimum Grip (Decimal Inch): 0.1260

Type Closed End

Head Type Button

Size Code 64

Rivet Material Aluminum

Mandrel Material Steel

Minimum Grip (Decimal Inch) 0.1260

Maximum Grip (Decimal Inch) 0.2500

Head Diameter (Decimal Inch) 0.3740

Minimum Hole Diameter (Decimal Inch) 0.1920

Maximum Hole Diameter (Decimal Inch) 0.1960

Rivet Material Grade 5056

Drill Size (Wire) #11

Body Diameter (Inch) 0.1875

Shear Strength (Lb.) 500

Tensile Strength (Lb.) 690

Fastener Standard IFI 126 Grade 19

Head Height (Decimal Inch) 0.0600

$997.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

USA Sealing - Plastic, Rubber & Synthetic Tube Inside Diameter (Inch): 3/8 Outside Diameter (Inch): 1/2

Item #: 29972494
Brand: USA Sealing
Model #: ZUSA-HT-664

Product Specifications

Plastic, Rubber & Synthetic Tube; Inside Diameter (Inch): 3/8 ; Outside Diameter (Inch): 1/2 ; Wall Thickness (Inch): 1/16 ; Material: Teflon PTFE ; Maximum Working Pressure (psi): 140 ; Color: White

Inside Diameter (Inch) 3/8

Outside Diameter (Inch) 1/2

Wall Thickness (Inch) 1/16

Material Teflon PTFE

Maximum Working Pressure (psi) 140

Color White

Standard Coil Length (Feet) 50

Length (Ft) 50

Hardness 65D

$622.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

USA Sealing - 4' x 36" x 1/4" Red Silicone Roll

Item #: 17428145
Brand: USA Sealing
Model #: RS-S50FDA-246

Product Specifications
Material	Silicone
Thickness (Inch)	1/4
Width (Inch)	36
Length Type	Stock Length
Length (Feet)	4
Backing Type	Plain
Color	Red
Maximum Temperature (F)	500.000
Minimum Temperature (F)	-80.000
Density (Lb./Cu. Ft.)	78.035
Tensile Strength (psi)	1000
Durometer (Shore A)	50
Additional Information	FDA

$567.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DeWALT Anchors & Fasteners - Adhesive Anchoring Screens & Tubes For Rod Diameter (Inch): 15/16 Material: Stainless Steel

Item #: 94164191
Brand: DeWALT Anchors & Fasteners
Model #: 07867-PWR

Features and Benefits

Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress, outdoor and corrosive applications.

Product Specifications

Adhesive Anchoring Screens & Tubes; For Rod Diameter (Inch): 15/16 ; Material: Stainless Steel ; Length (Inch): 13 ; Length (Decimal Inch): 13.0000

For Rod Diameter (Inch) 15/16

Material Stainless Steel

Length (Inch) 13

Length (Decimal Inch) 13.0000

$680.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Drill Bit Size (mm)	7.94
Drill Bit Size (Inch)	5/16
Drill Bit Size (Decimal Inch)	0.3125
Drill Point Angle	140
Drill Bit Material	Solid Carbide
Drill Bit Finish/Coating	EgiAs
Overall Length (Decimal Inch)	15.3900
Overall Length (mm)	391.00
Through Coolant	Coolant Through
Shank Diameter (Inch)	5/16
Flute Length (mm)	341.42
Cutting Direction	Right Hand
Flute Length x Diameter Ratio	40xD
Number of Flutes	2
Point Type	R Thinning

Pipe Size (Inch)	2
End Connections	FNPTxFNPT
Actuator Type	Pneumatic
Overall Length (Decimal Inch)	8.1500
Material	Ni-Plated Brass
Seal Material	Viton

Type	Closed End
Head Type	Button
Size Code	64
Rivet Material	Aluminum
Mandrel Material	Steel
Minimum Grip (Decimal Inch)	0.1260
Maximum Grip (Decimal Inch)	0.2500
Head Diameter (Decimal Inch)	0.3740
Minimum Hole Diameter (Decimal Inch)	0.1920
Maximum Hole Diameter (Decimal Inch)	0.1960
Rivet Material Grade	5056
Drill Size (Wire)	#11
Body Diameter (Inch)	0.1875
Shear Strength (Lb.)	500
Tensile Strength (Lb.)	690
Fastener Standard	IFI 126 Grade 19
Head Height (Decimal Inch)	0.0600

Inside Diameter (Inch)	3/8
Outside Diameter (Inch)	1/2
Wall Thickness (Inch)	1/16
Material	Teflon PTFE
Maximum Working Pressure (psi)	140
Color	White
Standard Coil Length (Feet)	50
Length (Ft)	50
Hardness	65D

For Rod Diameter (Inch)	15/16
Material	Stainless Steel
Length (Inch)	13
Length (Decimal Inch)	13.0000