Email: sales@apextoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 1 - (25001 Products)

Value Collection - M6x1.00 Metric Coarse, 35mm Length Under Head Slotted Drive Machine Screw - Pan Head, Grade 316 & A4 Stainless Steel, Uncoated, Without Washer - Apex Tool & Supply

Value Collection - M6x1.00 Metric Coarse, 35mm Length Under Head Slotted Drive Machine Screw - Pan Head, Grade 316 & A4 Stainless Steel, Uncoated, Without Washer


Item #: 03017779
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Pan head types have cylindrical heads with rounded edges and flat bearing surfaces. Their low head height and large diameter provide increased driving power.
Slotted drive types are used with flat-blade drivers. They have one linear slot that runs the length of the head. Drivers must be centered in the slot during tightening or they will slip out and damage the fastener.
Stainless steel is a strong, corrosion-resistant alloy with excellent resistance to heat. It is used in high-stress, outdoor and corrosive applications.
Product Specifications
System of Measurement Metric
Thread Size (mm) M6x1.00
Head Type Pan
Drive Type Slotted
Length (mm) 35.00
Material Stainless Steel
Material Grade 316; A4
Finish/Coating Uncoated
Washer Type Without Washer
Length Measurement Type Length Under Head
Fastener Standard DIN 85
Thread Standard Metric Coarse

$166.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Buildex - 3/8" Zinc-Plated Steel Vertical (End Drilled) Mount Threaded Rod Anchor - 5/8" Diam x 1-1/2" Long, 2,810 Lb Ultimate Pullout, For Use with Concrete/Masonry - Apex Tool & Supply

Buildex - 3/8" Zinc-Plated Steel Vertical (End Drilled) Mount Threaded Rod Anchor - 5/8" Diam x 1-1/2" Long, 2,810 Lb Ultimate Pullout, For Use with Concrete/Masonry


Item #: 05888888
Brand: Buildex
Model #: 560164
Exact Tooling IR#: 04

Features and Benefits

Concrete/masonry includes cast concrete, brick, cinder block and hollow block. Threaded rod anchors for concrete are ideal for light- and medium-duty applications.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Product Specifications
Mount Type Vertical (End Drilled)
For Material Type Concrete/Masonry
For Rod Size (Inch) 3/8
Material Steel
Finish/Coating Zinc-Plated
Ultimate Pullout (Lb.) 2810.00
Diameter (Inch) 5/8
Length (Inch) 1-1/2

$166.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Dayton Lamina - 2-1/2" Diam x 11" Long Press Fit Ball Bearing Guide Post - 1/2-13, Hardened Steel - Apex Tool & Supply

Dayton Lamina - 2-1/2" Diam x 11" Long Press Fit Ball Bearing Guide Post - 1/2-13, Hardened Steel


Item #: 01699891
Brand: Dayton Lamina
Model #: 5-2044-82
Exact Tooling IR#: 04

Product Specifications
Attachment Method Press Fit
Body Diameter (Inch) 2-1/2
Post Type Ball Bearing
Overall Length (Inch) 11
Material Hardened Steel
Thread Size 1/2-13

$165.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Bessey - 4-3/4" Deep Throat, 12" Max Capacity, Standard Sliding Arm Clamp - 1,980 Lb Clamping Pressure, 0.7" Spindle Diam - Apex Tool & Supply

Bessey - 4-3/4" Deep Throat, 12" Max Capacity, Standard Sliding Arm Clamp - 1,980 Lb Clamping Pressure, 0.7" Spindle Diam


Item #: 64816564
Brand: Bessey
Model #: 1800-S12
Exact Tooling IR#: 04

Features and Benefits

Sliding arm clamps are used for holding a workpiece in place during an operation. The sliding arm is designed with a rail, pressure plate and sliding jaw for fast clamping action. An extender block or V-pad will be required for some applications.
T-handles are designed with threaded spindles allowing for maximum clamping pressure.
Product Specifications
Clamp Type Standard
Maximum Capacity (Inch) 12
Maximum Capacity (Decimal Inch) 12.0000
Throat Depth (Inch) 4-3/4
Throat Depth (Decimal Inch) 4.7500
Handle Style T-Handle
Frame Material Steel
Clamping Pressure (Lb.) 1980
Series 1800-S
Spindle Diameter (Decimal Inch) 0.7000
Spindle Material High Carbon Steel
Rail Size (Inch) 1-3/32 x 7/16
Rail Length (Inch) 12
Pad Material Steel
Includes Ergonomic Bessey Grip; MorPad; Patented Rail Profile

$163.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cratex - 6" Diam x 1/2" Hole x 1/2" Thick, 46 Grit Surface Grinding Wheel - Coarse Grade - Apex Tool & Supply

Cratex - 6" Diam x 1/2" Hole x 1/2" Thick, 46 Grit Surface Grinding Wheel - Coarse Grade


Item #: 05047642
Brand: Cratex
Exact Tooling IR#: 04

Product Specifications
Wheel Diameter (Inch) 6
Hole Size (Inch) 1/2
Wheel Thickness (Inch) 1/2
Grade Coarse
Grit 46
Wheel Hardness Rating Hard

$235.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 5" Diam x 1-1/4" Hole x 1/8" Thick, N Hardness, 150 Grit Surface Grinding Wheel - Diamond, Type 1A1, Very Fine Grade - Apex Tool & Supply

Made in USA - 5" Diam x 1-1/4" Hole x 1/8" Thick, N Hardness, 150 Grit Surface Grinding Wheel - Diamond, Type 1A1, Very Fine Grade


Item #: 03571262
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Diamond is one of the hardest abrasive materials. Commonly used in grinding and polishing ceramic, stone and aluminum alloy.
Straight Wheel - Superabrasive.
Product Specifications
Wheel Diameter (Inch) 5
Hole Size (Inch) 1-1/4
Wheel Thickness (Inch) 1/8
Wheel Hardness N
Abrasive Material Diamond
Grade Very Fine
Grit 150
Wheel Type Number Type 1A1
Wheel Hardness Rating Medium
Superabrasive Depth (Inch) 1/8
Superabrasive Concentration (%) 100

$123.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Merit Abrasives - 3" Disc Diam, 50 Grit, Zirconia Alumina Quick Change Disc - Type R Attaching System, Coated, Blue, Coarse Grade, 20,000 RPM - Apex Tool & Supply

Merit Abrasives - 3" Disc Diam, 50 Grit, Zirconia Alumina Quick Change Disc - Type R Attaching System, Coated, Blue, Coarse Grade, 20,000 RPM


Item #: 72376254
Brand: Merit Abrasives
Model #: 08834167116
Exact Tooling IR#: 04

Features and Benefits

Type R attachment systems feature roll-on/roll-off style fasteners (External Thread). They are interchangeable with Roloc, TR and Type III Styles.
More durable than aluminum oxide, zirconia-alumina is best for medium- to heavy-material removal. The material grains constantly fracture to produce new sharp edges. Commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings and some stainless steels.
Product Specifications
Attaching System Type R
Disc Diameter (Inch) 3
Grade Coarse
Grit 50
Maximum RPM 20000
Abrasive Material Zirconia Alumina
Backing Material Cloth
Abrasive Type Coated
Disc Color Blue
Quick Change Compatibility Power-Lock Type 3

$146.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Merit Abrasives - 3" Disc Diam, 50 Grit, Zirconia Alumina Quick Change Disc - Type S Attaching System, Coated, Blue, Coarse Grade, 20,000 RPM - Apex Tool & Supply

Merit Abrasives - 3" Disc Diam, 50 Grit, Zirconia Alumina Quick Change Disc - Type S Attaching System, Coated, Blue, Coarse Grade, 20,000 RPM


Item #: 72379365
Brand: Merit Abrasives
Model #: 08834167074
Exact Tooling IR#: 04

Features and Benefits

Type S attachment systems feature a turn-on/turn-off style fastener (1/4-1/2 turn to lock in place). They are interchangeable with TS and Type II Styles.
More durable than aluminum oxide, zirconia-alumina is best for medium- to heavy-material removal. The material grains constantly fracture to produce new sharp edges. Commonly used on carbon steels, aerospace alloys, nickel alloys, aluminum, cast iron, forgings and some stainless steels.
Product Specifications
Attaching System Type S
Disc Diameter (Inch) 3
Grade Coarse
Grit 50
Maximum RPM 20000
Abrasive Material Zirconia Alumina
Backing Material Cloth
Abrasive Type Coated
Disc Color Blue
Quick Change Compatibility Power-Lock Type 2

$146.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Merit Abrasives - 3" Disc Diam, 36 Grit, Ceramic Quick Change Disc - Type S Attaching System, Coated, Very Coarse Grade, 20,000 RPM - Apex Tool & Supply

Merit Abrasives - 3" Disc Diam, 36 Grit, Ceramic Quick Change Disc - Type S Attaching System, Coated, Very Coarse Grade, 20,000 RPM


Item #: 09607714
Brand: Merit Abrasives
Model #: 08834161303
Exact Tooling IR#: 04

Features and Benefits

Type S attachment systems feature a turn-on/turn-off style fastener (1/4-1/2 turn to lock in place). They are interchangeable with TS and Type II Styles.
Cooler cutting and more durable than natural aluminum based products, ceramic provides a sharp, high purity grain. Commonly used for precision grinding of steels, hard alloys and exotic materials.
Product Specifications
Attaching System Type S
Disc Diameter (Inch) 3
Grade Very Coarse
Grit 36
Maximum RPM 20000
Abrasive Material Ceramic
Abrasive Type Coated
Quick Change Compatibility Power-Lock Type 2

$198.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3M - Hook & Loop Disc - Ultra Fine Grade - Apex Tool & Supply

3M - Hook & Loop Disc - Ultra Fine Grade


Item #: 44727717
Brand: 3M
Model #: 00051131020856
Exact Tooling IR#: 04

Product Specifications
Grade Ultra Fine

$172.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Tape Logic - 3" x 60' Vinyl Floor & Egress Tape - Apex Tool & Supply

Tape Logic - 3" x 60' Vinyl Floor & Egress Tape


Item #: 16005902
Brand: Tape Logic
Model #: T96860BY

Product Specifications
Type Tape
Surface Type Anti-Slip
Special Color Properties Reflective
Color Black; Yellow
Pattern Striped
Traffic Type Heavy/High Traffic
Tape Material Vinyl
Width (Inch) 3
Length (Feet) 60
Thickness (mil) 33.0000

$244.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Osborn - 8" OD, 2" Arbor Hole, Crimped Nylon Wheel Brush - 7/8" Face Width, 1-1/2" Trim Length, 0.04" Filament Diam, 4,500 RPM - Apex Tool & Supply

Osborn - 8" OD, 2" Arbor Hole, Crimped Nylon Wheel Brush - 7/8" Face Width, 1-1/2" Trim Length, 0.04" Filament Diam, 4,500 RPM


Item #: 54860218
Brand: Osborn
Model #: 0002229600
Exact Tooling IR#: 04

Features and Benefits

Crimped brushes provide additional strength compared to straight brushes and are commonly used where a knotted brush's impact would alter the working surface.
Nylon is used in wet and dry environments. It has a low moisture absorption rate and conforms well to surfaces.
Product Specifications
Outside Diameter (Inch) 8
Arbor Hole Size (Inch) 2
Wire Type Crimped
Fill Material Nylon
Face Width (Inch) 7/8
Trim Length (Inch) 1-1/2
Maximum RPM 4500
Shank Included No
Filament/Wire Diameter (Decimal Inch) 0.0400
Encapsulated No
Grade Fine
Abrasive Material Silicon Carbide
Grit 80
Arbor Hole Style Two Keyway

$103.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rocky Mountain Twist - 1/16 to 3/8", 135° Point, Oxide Finish, High Speed Steel Jobber Length Drill Bit Set - Apex Tool & Supply

Rocky Mountain Twist - 1/16 to 3/8", 135° Point, Oxide Finish, High Speed Steel Jobber Length Drill Bit Set


Item #: 57647851
Brand: Rocky Mountain Twist
Model #: 95090822

Features and Benefits

High Speed Steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferrous materials.
Straight shanks are used for general purpose applications. The shank is smaller than the drill bit diameter. They are used with portable drills and drill presses on ferrous and non-ferrous materials.
Product Specifications
System of Measurement Inch
Drill Bit Material High Speed Steel
Drill Bit Set Type Jobber Length Drill Bits
Minimum Drill Bit Size (Decimal Inch) 0.0625
Minimum Drill Bit Size (Inch) 1/16
Maximum Drill Bit Size (Decimal Inch) 0.3750
Maximum Drill Bit Size (Inch) 3/8
Drill Point Angle 135
Number of Pieces 21
Drill Bit Finish/Coating Oxide
Drill Bit Size2 (Decimal Inch) 0.0625; 0.0781; 0.0938; 0.1094; 0.1250; 0.1406; 0.1563; 0.1719; 0.1875; 0.2031; 0.2188; 0.2344; 0.2500; 0.2656; 0.2813; 0.2969; 0.3125; 0.3281; 0.3438; 0.3594; 0.3750
Drill Bit Size (Inch) 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 11/64; 3/16; 13/64; 7/32; 15/64; 1/4; 17/64; 9/32; 19/64; 5/16; 21/64; 11/32; 23/64; 3/8
Material Set Type Metalworking/Multipurpose Drill Bits
Overall Length (Inch) 1-7/8; 2; 2-1/4; 2-5/8; 2-3/4; 2-7/8; 3-1/8; 3-1/4; 3-1/2; 3-5/8; 3-3/4; 3-7/8; 4; 4-1/8; 4-1/4; 4-3/8; 4-1/2; 4-5/8; 4-3/4; 4-7/8; 5
Point Type Split Point
Step Increments (Inch) 1/64
Set Includes (21) Jobber Length Drills
Shank Type Straight
PSC Code 5133
Storage Unit Type Case
Storage Unit Material Metal
Through Coolant No

$186.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 1.5mm Diam 2 Flute Solid Carbide 0.2mm Corner Radius End Mill - Apex Tool & Supply

Fraisa - 1.5mm Diam 2 Flute Solid Carbide 0.2mm Corner Radius End Mill


Item #: 18898353
Brand: Fraisa
Model #: X6531120

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 1.50
End Type Corner Radius
Corner Radius (mm) 0.2
Number of Flutes 2
Material Solid Carbide
Finish/Coating X-Al
Length of Cut (mm) 1.5000
Shank Diameter (mm) 6.0000
Overall Length (mm) 57.0000
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 25
Variable Helix No
Neck Diameter (mm) 1.400
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Series/List MicroX
Chipbreaker No

$80.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 2mm Diam 2 Flute Solid Carbide 0.3mm Corner Radius End Mill - Apex Tool & Supply

Fraisa - 2mm Diam 2 Flute Solid Carbide 0.3mm Corner Radius End Mill


Item #: 18900134
Brand: Fraisa
Model #: X6531145

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 2.00
End Type Corner Radius
Corner Radius (mm) 0.3
Number of Flutes 2
Material Solid Carbide
Finish/Coating X-Al
Length of Cut (mm) 2.0000
Shank Diameter (mm) 6.0000
Overall Length (mm) 57.0000
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 25
Variable Helix No
Neck Diameter (mm) 1.900
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Series/List MicroX
Chipbreaker No

$88.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 1.2mm Diam 4 Flute Solid Carbide 0.2mm Corner Radius End Mill - Apex Tool & Supply

Fraisa - 1.2mm Diam 4 Flute Solid Carbide 0.2mm Corner Radius End Mill


Item #: 18899674
Brand: Fraisa
Model #: X6634108

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 1.20
End Type Corner Radius
Corner Radius (mm) 0.2
Number of Flutes 4
Material Solid Carbide
Finish/Coating X-Al
Length of Cut (mm) 1.2000
Shank Diameter (mm) 6.0000
Overall Length (mm) 57.0000
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 30
Variable Helix No
Neck Diameter (mm) 1.100
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Series/List MicroX
Chipbreaker No

$74.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 0.5mm Diam 2 Flute Solid Carbide 0.1mm Corner Radius End Mill - Apex Tool & Supply

Fraisa - 0.5mm Diam 2 Flute Solid Carbide 0.1mm Corner Radius End Mill


Item #: 18899583
Brand: Fraisa
Model #: X6538050

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 0.50
End Type Corner Radius
Corner Radius (mm) 0.1
Number of Flutes 2
Material Solid Carbide
Finish/Coating X-Al
Length of Cut (mm) 0.5000
Shank Diameter (mm) 6.0000
Overall Length (mm) 57.0000
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 25
Variable Helix No
Neck Diameter (mm) 0.450
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Series/List MicroX
Chipbreaker No

$84.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 0.5mm Diam 2 Flute Solid Carbide 0.05mm Corner Radius End Mill - Apex Tool & Supply

Fraisa - 0.5mm Diam 2 Flute Solid Carbide 0.05mm Corner Radius End Mill


Item #: 18899450
Brand: Fraisa
Model #: X6536048

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 0.50
End Type Corner Radius
Corner Radius (mm) 0.05
Number of Flutes 2
Material Solid Carbide
Finish/Coating X-Al
Length of Cut (mm) 0.5000
Shank Diameter (mm) 6.0000
Overall Length (mm) 57.0000
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 25
Variable Helix No
Neck Diameter (mm) 0.450
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Series/List MicroX
Chipbreaker No

$84.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 0.5mm Diam 2 Flute Solid Carbide 0.1mm Corner Radius End Mill - Apex Tool & Supply

Fraisa - 0.5mm Diam 2 Flute Solid Carbide 0.1mm Corner Radius End Mill


Item #: 18897272
Brand: Fraisa
Model #: X6535050

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 0.50
End Type Corner Radius
Corner Radius (mm) 0.1
Number of Flutes 2
Material Solid Carbide
Finish/Coating X-Al
Length of Cut (mm) 0.5000
Shank Diameter (mm) 6.0000
Overall Length (mm) 57.0000
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 25
Variable Helix No
Neck Diameter (mm) 0.450
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Series/List MicroX
Chipbreaker No

$84.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Fraisa - 0.8mm Diam 2 Flute Solid Carbide 0.1mm Corner Radius End Mill - Apex Tool & Supply

Fraisa - 0.8mm Diam 2 Flute Solid Carbide 0.1mm Corner Radius End Mill


Item #: 18897082
Brand: Fraisa
Model #: X6532080

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 0.80
End Type Corner Radius
Corner Radius (mm) 0.1
Number of Flutes 2
Material Solid Carbide
Finish/Coating X-Al
Length of Cut (mm) 0.8000
Shank Diameter (mm) 6.0000
Overall Length (mm) 57.0000
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 25
Variable Helix No
Neck Diameter (mm) 0.750
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Series/List MicroX
Chipbreaker No

$72.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It