8" Pilot Hole Diam, Medium Grade

Item #: 09899279
Brand: Merit Abrasives
Model #: 08834181775
Exact Tooling IR#: 04

Features and Benefits

Aluminum Oxide is the most commonly used abrasive. Best-suited for general purpose deburring and blending, it is tough, economical, and fracture-resistant. Commonly used on ferrous alloys, high-tensile materials, and wood.

Product Specifications
Maximum Roll Diameter (Inch)	5/8
Overall Length (Inch)	1-1/2
Abrasive Material	Aluminum Oxide
Grade	Medium
Pilot Hole Diameter (Inch)	1/8
Grit	80

Product Specifications

Maximum Roll Diameter (Inch) 5/8

Overall Length (Inch) 1-1/2

Abrasive Material Aluminum Oxide

Grade Medium

Pilot Hole Diameter (Inch) 1/8

Grit 80

$259.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM

Item #: 93315067
Brand: Osborn
Model #: 0003312700
Exact Tooling IR#: 04

Features and Benefits

Steel is the most common filament/wire material due to its durability and cutting action. It is suitable for general purpose applications and can be used on iron, steel, aluminum, brass, copper and wood.

Knotted brushes are made up of multiple filaments/wires bundled together to provide the most aggressive brushing action.

Product Specifications
Brush Diameter (Inch)	6
Fill Material	Steel
Filament/Wire Diameter (Decimal Inch)	0.0200
Wire Type	Knotted
Arbor Type	Threaded Arbor
Arbor Hole Thread Size	5/8-11
Trim Length (Inch)	1-3/4
Maximum RPM	6000
Shank Included	No

Product Specifications

Brush Diameter (Inch) 6

Fill Material Steel

Filament/Wire Diameter (Decimal Inch) 0.0200

Wire Type Knotted

Arbor Type Threaded Arbor

Arbor Hole Thread Size 5/8-11

Trim Length (Inch) 1-3/4

Maximum RPM 6000

Shank Included No

$112.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Atrax - Letter Y 118° Solid Carbide Jobber Drill

Item #: 85255255
Brand: Atrax
Model #:

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic.

Spiral flutes are constructed with a higher flute angle to remove chips more easily.

Product Specifications

Drill Bit Size (Letter) Y

Drill Bit Size (Decimal Inch) 0.4040

Drill Point Angle 118

Drill Bit Material Solid Carbide

Drill Bit Finish/Coating Bright

Flute Type Spiral

Cutting Direction Right Hand

Shank Type Straight

Coolant Through No

Flute Length (Inch) 2-7/8

Flute Length (Decimal Inch) 2.8750

Overall Length (Decimal Inch) 4.5000

Overall Length (Inch) 4-1/2

Point Type Standard

Shank Diameter (Decimal Inch) 0.4040

Spiral Type Regular Spiral

Web Configuration Tapered

Drill Bit Diameter Tolerance (Decimal Inch) -0.0005 to 0.0000

Number of Flutes 2

Web Thinning Web-Thinned

Material Grade C2

Series/List 450

Product Specifications
Drill Bit Size (Letter)	Y
Drill Bit Size (Decimal Inch)	0.4040
Drill Point Angle	118
Drill Bit Material	Solid Carbide
Drill Bit Finish/Coating	Bright
Flute Type	Spiral
Cutting Direction	Right Hand
Shank Type	Straight
Coolant Through	No
Flute Length (Inch)	2-7/8
Flute Length (Decimal Inch)	2.8750
Overall Length (Decimal Inch)	4.5000
Overall Length (Inch)	4-1/2
Point Type	Standard
Shank Diameter (Decimal Inch)	0.4040
Spiral Type	Regular Spiral
Web Configuration	Tapered
Drill Bit Diameter Tolerance (Decimal Inch)	-0.0005 to 0.0000
Number of Flutes	2
Web Thinning	Web-Thinned
Material Grade	C2
Series/List	450

$133.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Walter-Titex - 15.5mm 130° High Speed Steel Jobber Drill

Item #: 52996683
Brand: Walter-Titex
Model #: 5059446

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Oxide prevents chip building, galling and welding on the workpiece. It is commonly used on low carbons, stainless steel and ferrous metals.

Parabolic flutes are constructed with a wider flute shape for increased chip flow.

Product Specifications

Drill Bit Size (mm) 15.50

Drill Bit Size (Decimal Inch) 0.6102

Drill Point Angle 130

Drill Bit Material High Speed Steel

Drill Bit Finish/Coating Oxide

Flute Type Parabolic

Cutting Direction Right Hand

Shank Type Straight

Coolant Through No

Flute Length (mm) 120.00

Flute Length (Decimal Inch) 4.7244

Overall Length (mm) 178.00

Overall Length (Decimal Inch) 7.0079

Flute Length x Diameter Ratio 8xD

Point Type UFL

Shank Diameter (mm) 15.50

Shank Diameter (Decimal Inch) 0.6102

Maximum Drilling Depth (Decimal Inch) 4.0945

Maximum Drilling Depth (mm) 104.00

Shank Length (mm) 58.00

Shank Length (Decimal Inch) 2.2835

Specification Designation DIN

Web Configuration Tapered

Drill Bit Diameter Tolerance (mm) h8

Number of Flutes 2

Web Thinning Web-Thinned

Specification Number DIN 338

Material Grade M2

Series/List A1222

Product Specifications
Drill Bit Size (mm)	15.50
Drill Bit Size (Decimal Inch)	0.6102
Drill Point Angle	130
Drill Bit Material	High Speed Steel
Drill Bit Finish/Coating	Oxide
Flute Type	Parabolic
Cutting Direction	Right Hand
Shank Type	Straight
Coolant Through	No
Flute Length (mm)	120.00
Flute Length (Decimal Inch)	4.7244
Overall Length (mm)	178.00
Overall Length (Decimal Inch)	7.0079
Flute Length x Diameter Ratio	8xD
Point Type	UFL
Shank Diameter (mm)	15.50
Shank Diameter (Decimal Inch)	0.6102
Maximum Drilling Depth (Decimal Inch)	4.0945
Maximum Drilling Depth (mm)	104.00
Shank Length (mm)	58.00
Shank Length (Decimal Inch)	2.2835
Specification Designation	DIN
Web Configuration	Tapered
Drill Bit Diameter Tolerance (mm)	h8
Number of Flutes	2
Web Thinning	Web-Thinned
Specification Number	DIN 338
Material Grade	M2
Series/List	A1222

$90.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Kennametal - 4mm 135° Solid Carbide Jobber Drill

Item #: 58462847
Brand: Kennametal
Model #: 4112591

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Multilayer Titanium Aluminum Nitride (TiAlN) is a blended coating that is more efficient than TIN. It offers a high level of wear resistance at higher cutting speeds and used on high alloy steels and cast iron.

Spiral flutes are constructed with a higher flute angle to remove chips more easily.

Product Specifications

Drill Bit Size (mm) 4.00

Drill Bit Size (Decimal Inch) 0.1575

Drill Point Angle 135

Drill Bit Material Solid Carbide

Drill Bit Finish/Coating Multilayer TiAlN

Flute Type Spiral

Cutting Direction Right Hand

Shank Type Straight

Coolant Through Coolant Through

Flute Length (mm) 36.00

Flute Length (Decimal Inch) 1.4173

Overall Length (mm) 74.00

Overall Length (Decimal Inch) 2.9134

Flute Length x Diameter Ratio 5xD

Point Type Standard

Shank Diameter (mm) 6.00

Shank Diameter (Decimal Inch) 0.2362

Maximum Drilling Depth (Decimal Inch) 1.1417

Maximum Drilling Depth (mm) 29.00

Spiral Type Regular Spiral

Shank Length (mm) 36.00

Shank Length (Decimal Inch) 1.4173

Specification Designation DIN

Drill Point Length (mm) 0.75

Drill Point Length (Decimal Inch) 0.0297

Web Configuration Tapered

Drill Bit Diameter Tolerance (mm) 0.004 to 0.016

Drill Bit Diameter Tolerance (Decimal Inch) 0.0002 to 0.0006

Specification Number DIN 6537K

Material Grade KCPK15

Series/List B225A-HP

Product Specifications
Drill Bit Size (mm)	4.00
Drill Bit Size (Decimal Inch)	0.1575
Drill Point Angle	135
Drill Bit Material	Solid Carbide
Drill Bit Finish/Coating	Multilayer TiAlN
Flute Type	Spiral
Cutting Direction	Right Hand
Shank Type	Straight
Coolant Through	Coolant Through
Flute Length (mm)	36.00
Flute Length (Decimal Inch)	1.4173
Overall Length (mm)	74.00
Overall Length (Decimal Inch)	2.9134
Flute Length x Diameter Ratio	5xD
Point Type	Standard
Shank Diameter (mm)	6.00
Shank Diameter (Decimal Inch)	0.2362
Maximum Drilling Depth (Decimal Inch)	1.1417
Maximum Drilling Depth (mm)	29.00
Spiral Type	Regular Spiral
Shank Length (mm)	36.00
Shank Length (Decimal Inch)	1.4173
Specification Designation	DIN
Drill Point Length (mm)	0.75
Drill Point Length (Decimal Inch)	0.0297
Web Configuration	Tapered
Drill Bit Diameter Tolerance (mm)	0.004 to 0.016
Drill Bit Diameter Tolerance (Decimal Inch)	0.0002 to 0.0006
Specification Number	DIN 6537K
Material Grade	KCPK15
Series/List	B225A-HP

$184.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 5/8" Diam 8 Flute Solid Carbide 0.09" Corner Radius End Mill

Item #: 12749305
Brand: Accupro
Model #:

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

AlTiCrN is a multi-layered nanocomposite made up of aluminum chromium titanium nitride. It offers increased performance at high-speeds, improved edge toughness and long tool life. The titanium reduces the adhesive wear compared to conventional AlCrN coatings. It is commonly used for stainless steel, titanium, high temperature alloys and hardened tool steels 35HRC or greater.

Product Specifications

Mill Diameter (Inch) 5/8

Mill Diameter (Decimal Inch) 0.6250

End Type Corner Radius

Corner Radius (Decimal Inch) 0.09

Number of Flutes 8

Material Solid Carbide

Finish/Coating AlTiCrN

Length of Cut (Inch) 1-5/8

Length of Cut (Decimal Inch) 1.6250

Shank Diameter (Inch) 5/8

Overall Length (Inch) 3-1/2

Flute Type Spiral

Cutting Direction Right Hand

Helix Angle 40

Variable Helix No

Material Grade Micrograin

Single or Double End Single

Centercutting Yes

Flute Direction Right Hand

Mill Diameter Tolerance (Decimal Inch) +0.000/-0.001

Shank Diameter Tolerance (Decimal Inch) +0.000/-0.002

Extended Reach No

Shank Type Cylindrical

PSC Code 3455

Chipbreaker No

Product Specifications
Mill Diameter (Inch)	5/8
Mill Diameter (Decimal Inch)	0.6250
End Type	Corner Radius
Corner Radius (Decimal Inch)	0.09
Number of Flutes	8
Material	Solid Carbide
Finish/Coating	AlTiCrN
Length of Cut (Inch)	1-5/8
Length of Cut (Decimal Inch)	1.6250
Shank Diameter (Inch)	5/8
Overall Length (Inch)	3-1/2
Flute Type	Spiral
Cutting Direction	Right Hand
Helix Angle	40
Variable Helix	No
Material Grade	Micrograin
Single or Double End	Single
Centercutting	Yes
Flute Direction	Right Hand
Mill Diameter Tolerance (Decimal Inch)	+0.000/-0.001
Shank Diameter Tolerance (Decimal Inch)	+0.000/-0.002
Extended Reach	No
Shank Type	Cylindrical
PSC Code	3455
Chipbreaker	No

$94.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 8.8mm 118° Spiral Flute Solid Carbide Screw Machine Drill Bit

Item #: 58251232
Brand: M.A. Ford
Model #: 22634640

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Spiral flutes are constructed of a higher flute angle to remove chips easier.

Product Specifications

Drill Bit Size (Decimal Inch) 0.3464

Drill Bit Size (mm) 8.80

Drill Point Angle 118

Drill Bit Material Solid Carbide

Drill Bit Finish/Coating Uncoated

Flute Type Spiral

Cutting Direction Right Hand

Shank Type Straight

Flute Length (mm) 40.00

Overall Length (mm) 84.00

Flute Length x Diameter Ratio 3xD

Shank Diameter (mm) 8.80

Shank Diameter (Decimal Inch) 0.3464

Specification Designation DIN

Spiral Type Regular Spiral

Threaded Shank No

Number of Flutes 2

Drill Bit Diameter Tolerance (mm) +0.000 to -0.013

Number of Margins 1.000

Series/List 226

Product Specifications
Drill Bit Size (Decimal Inch)	0.3464
Drill Bit Size (mm)	8.80
Drill Point Angle	118
Drill Bit Material	Solid Carbide
Drill Bit Finish/Coating	Uncoated
Flute Type	Spiral
Cutting Direction	Right Hand
Shank Type	Straight
Flute Length (mm)	40.00
Overall Length (mm)	84.00
Flute Length x Diameter Ratio	3xD
Shank Diameter (mm)	8.80
Shank Diameter (Decimal Inch)	0.3464
Specification Designation	DIN
Spiral Type	Regular Spiral
Threaded Shank	No
Number of Flutes	2
Drill Bit Diameter Tolerance (mm)	+0.000 to -0.013
Number of Margins	1.000
Series/List	226

$79.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 0.525" Carbide-Tipped 6 Flute Chucking Reamer

Item #: 32813594
Brand: Made in USA
Model #:

Features and Benefits

Carbide tips cuts faster than high speed steel. It is commonly used on ferrous and nonferrous metals including cast iron, steel and steel alloy.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (Decimal Inch) 0.5250

Reamer Material Carbide-Tipped

Shank Type Straight

Flute Type Straight

Overall Length (Inch) 8

Flute Length (Inch) 2

Variable Diameter Reamer Type None

Number of Flutes 6

Maximum Shank Diameter (Inch) 7/16

Over/Under Size Reamer No

Dowel Pin Reamer No

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Reamer Diameter Tolerance (Decimal Inch) 0.0003 to -0.0000

Product Specifications
Reamer Diameter (Decimal Inch)	0.5250
Reamer Material	Carbide-Tipped
Shank Type	Straight
Flute Type	Straight
Overall Length (Inch)	8
Flute Length (Inch)	2
Variable Diameter Reamer Type	None
Number of Flutes	6
Maximum Shank Diameter (Inch)	7/16
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright
Reamer Diameter Tolerance (Decimal Inch)	0.0003 to -0.0000

$182.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 0.546" Carbide-Tipped 6 Flute Chucking Reamer

Item #: 30125991
Brand: Made in USA
Model #:

Features and Benefits

Carbide tips cuts faster than high speed steel. It is commonly used on ferrous and nonferrous metals including cast iron, steel and steel alloy.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (Decimal Inch) 0.5460

Reamer Material Carbide-Tipped

Shank Type Straight

Flute Type Straight

Overall Length (Inch) 8

Flute Length (Inch) 2

Variable Diameter Reamer Type None

Number of Flutes 6

Maximum Shank Diameter (Inch) 7/16

Over/Under Size Reamer No

Dowel Pin Reamer No

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Reamer Diameter Tolerance (Decimal Inch) 0.0003 to -0.0000

Product Specifications
Reamer Diameter (Decimal Inch)	0.5460
Reamer Material	Carbide-Tipped
Shank Type	Straight
Flute Type	Straight
Overall Length (Inch)	8
Flute Length (Inch)	2
Variable Diameter Reamer Type	None
Number of Flutes	6
Maximum Shank Diameter (Inch)	7/16
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright
Reamer Diameter Tolerance (Decimal Inch)	0.0003 to -0.0000

$182.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Alvord Polk - 19mm High Speed Steel 8 Flute Chucking Reamer

Item #: 06669881
Brand: Alvord Polk
Model #: 00198

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (mm) 19.00

Reamer Diameter (Decimal Inch) 0.7480

Reamer Material High Speed Steel

Shank Type Straight

Flute Type Straight

Overall Length (Inch) 9-1/2

Flute Length (Inch) 2-1/2

Variable Diameter Reamer Type None

Number of Flutes 8

Minimum Shank Diameter (Decimal Inch) 0.6230

Maximum Shank Diameter (Decimal Inch) 0.6245

Over/Under Size Reamer No

Dowel Pin Reamer No

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Product Specifications
Reamer Diameter (mm)	19.00
Reamer Diameter (Decimal Inch)	0.7480
Reamer Material	High Speed Steel
Shank Type	Straight
Flute Type	Straight
Overall Length (Inch)	9-1/2
Flute Length (Inch)	2-1/2
Variable Diameter Reamer Type	None
Number of Flutes	8
Minimum Shank Diameter (Decimal Inch)	0.6230
Maximum Shank Diameter (Decimal Inch)	0.6245
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright

$108.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Knipex - Pliers Type: Hose Clamp Pliers Jaw Type: Rotating Tip

Item #: 96524939
Brand: Knipex
Model #: 85 51 250 AFSBA

Product Specifications

Pliers; Type: Hose Clamp Pliers ; Jaw Type: Rotating Tip ; Overall Length Range: 9" - 11.9" ; Overall Length (Inch): 9.8500 ; Style: Spring Hose Clamp Pliers w/Locking Device ; Number of Positions: 19

Type Hose Clamp Pliers

Jaw Type Rotating Tip

Overall Length Range 9" - 11.9"

Overall Length (Inch) 9.8500

Style Spring Hose Clamp Pliers w/Locking Device

Number of Positions 19

Jaw Length (mm) 29

Maximum Capacity (Inch) 2

Handle Material Non-Slip Plastic Coated

Side Cutter No

$146.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 27/64" 140° Solid Carbide Jobber Drill

Item #: 76545151
Brand: DORMER
Model #: 0624197

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.

Spiral flutes are constructed with a higher flute angle to remove chips more easily.

Product Specifications

Drill Bit Size (Inch) 27/64

Drill Bit Size (Decimal Inch) 0.4219

Drill Point Angle 140

Drill Bit Material Solid Carbide

Drill Bit Finish/Coating TiAlN

Flute Type Spiral

Cutting Direction Right Hand

Shank Type Straight

Coolant Through No

Flute Length (mm) 70.00

Overall Length (mm) 118.00

Flute Length x Diameter Ratio 5xD

Point Type Four Facet, Split Point

Shank Diameter (mm) 12.00

Spiral Type Regular Spiral

Shank Length (mm) 45.00

Specification Designation DIN

Web Configuration Tapered

Web Thinning Web-Thinned

Specification Number DIN 6535HA (Shank); DIN 6537L

Drill Bit Grade High Performance

Series/List R454

Product Specifications
Drill Bit Size (Inch)	27/64
Drill Bit Size (Decimal Inch)	0.4219
Drill Point Angle	140
Drill Bit Material	Solid Carbide
Drill Bit Finish/Coating	TiAlN
Flute Type	Spiral
Cutting Direction	Right Hand
Shank Type	Straight
Coolant Through	No
Flute Length (mm)	70.00
Overall Length (mm)	118.00
Flute Length x Diameter Ratio	5xD
Point Type	Four Facet, Split Point
Shank Diameter (mm)	12.00
Spiral Type	Regular Spiral
Shank Length (mm)	45.00
Specification Designation	DIN
Web Configuration	Tapered
Web Thinning	Web-Thinned
Specification Number	DIN 6535HA (Shank); DIN 6537L
Drill Bit Grade	High Performance
Series/List	R454

$159.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 7/16" 118° 2-Flute High Speed Steel Extra Length Drill Bit

Item #: 65623365
Brand: DORMER
Model #: 0214589

Features and Benefits

High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Oxide prevents chip building, galling and welding on the workpiece. It is commonly used on low carbons, stainless steel and ferrous metals.

Product Specifications

Drill Bit Size (Inch) 7/16

Drill Bit Size (Decimal Inch) 0.4374

Drill Point Angle 118

Drill Bit Material High Speed Steel

Drill Bit Finish/Coating Oxide

Overall Length (mm) 500.00

Through Coolant NonCoolant Through

Shank Diameter (Decimal Inch) 0.4374

Shank Diameter (Inch) 7/16

Shank Diameter (mm) 11.11

Flute Length (mm) 460.00

Flute Length (Decimal Inch) 15.7600

Cutting Direction Right Hand

Flute Length x Diameter Ratio 10xD

Flute Type Spiral

Number of Flutes 2

Shank Type Straight

Spiral Type Regular Spiral

Specification Designation BS

Threaded Shank No

Web Configuration Tapered

Drill Bit Diameter Tolerance (mm) 0.000 to -0.027

Web Thinning Web-Thinned

Material Grade M2

Series/List A125

Product Specifications
Drill Bit Size (Inch)	7/16
Drill Bit Size (Decimal Inch)	0.4374
Drill Point Angle	118
Drill Bit Material	High Speed Steel
Drill Bit Finish/Coating	Oxide
Overall Length (mm)	500.00
Through Coolant	NonCoolant Through
Shank Diameter (Decimal Inch)	0.4374
Shank Diameter (Inch)	7/16
Shank Diameter (mm)	11.11
Flute Length (mm)	460.00
Flute Length (Decimal Inch)	15.7600
Cutting Direction	Right Hand
Flute Length x Diameter Ratio	10xD
Flute Type	Spiral
Number of Flutes	2
Shank Type	Straight
Spiral Type	Regular Spiral
Specification Designation	BS
Threaded Shank	No
Web Configuration	Tapered
Drill Bit Diameter Tolerance (mm)	0.000 to -0.027
Web Thinning	Web-Thinned
Material Grade	M2
Series/List	A125

$161.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

International Chemical - Machine Oil Type: Hydraulic Oil ISO Grade: 15

Item #: 96530639
Brand: International Chemical
Model #: 120953

Features and Benefits

Hydraulic oil is engineered to lubricate pumps, motors transmissions and other hydraulic systems. It maintains viscosity over long periods of time and has a good thermal stability.

Mineral oil is a liquid by product made from petroleum. It performs well under varied conditions and is an economical alternative to synthetic oils.

Product Specifications

Machine Oil; Type: Hydraulic Oil ; ISO Grade: 15 ; Composition: Mineral ; Container Size Range: 5 Gal. - 49.9 Gal. ; Food Grade: NonFoodGrade ; Series: Zurnpreem

Type Hydraulic Oil

ISO Grade 15

Composition Mineral

Container Size Range 5 Gal. - 49.9 Gal.

Food Grade NonFoodGrade

Series Zurnpreem

Container Type Pail

Container Size 5 Gal

$144.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - Spiral Flute Taps Thread Size (mm): MF14x1.5 Chamfer: Modified Bottoming

Item #: 14420749
Brand: Seco
Model #: 10001152

Features and Benefits

Modified bottoming chamfers are similar to bottoming chamfers, but they are longer and have more teeth. They are used for threading blind holes and have 2 to 2-1/2 threads.

Slow Spiral Flutes with 8-20 degree angles are used for tough materials like high nickel alloys, titanium and some series of stainless steels.

Product Specifications

Spiral Flute Taps; Thread Size (mm): MF14x1.5 ; Chamfer: Modified Bottoming ; Class of Fit: 6HX ; Number of Flutes: 4 ; Material: HSS-E-PM ; Finish/Coating: ACN

Thread Size (mm) MF14x1.5

Chamfer Modified Bottoming

Class of Fit 6HX

Number of Flutes 4

Material HSS-E-PM

Finish/Coating ACN

Thread Direction Right Hand

Flute Direction Right Hand

Through Coolant No

Overall Length (mm) 100.0000

Helix Angle 15.00

Thread Standard MF

Oversize No

Thread Length (mm) 21.000

Flute Type Slow Spiral

Series/List MTH

Tapping Depth (mm) 71.00

Shank Diameter (mm) 11.0000

Shank Length (mm) 29.000

Material Application Super Alloys; Difficult-to-Machine Steels

$153.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 19.25mm, 2MT 118° Point High Speed Steel Taper Shank Drill Bit

Item #: 69319606
Brand: Guhring
Model #: 9002570192500

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Oxide, also known as black oxide or steam oxide, is a surface treatment that prevents chip building, galling and welding on the workpiece. It is commonly used on low carbons, stainless steel and ferrous metals.

Spiral flutes are constructed with a higher flute angle to remove chips more easily.

Product Specifications

Drill Bit Size (mm) 19.25

Drill Bit Size (Decimal Inch) 0.7579

Drill Point Angle 118

Shank Taper Designation 2MT

Drill Bit Material High Speed Steel

Drill Bit Finish/Coating Oxide

Flute Type Spiral

Overall Length (mm) 275.00

Flute Length (mm) 177.00

Spiral Type Regular Spiral

Cutting Direction Right Hand

Point Type Cone Relief

Web Thinning Web-Thinning

Drill Bit Diameter Tolerance (mm) h8

Material Grade M2

Series/List 257

Product Specifications
Drill Bit Size (mm)	19.25
Drill Bit Size (Decimal Inch)	0.7579
Drill Point Angle	118
Shank Taper Designation	2MT
Drill Bit Material	High Speed Steel
Drill Bit Finish/Coating	Oxide
Flute Type	Spiral
Overall Length (mm)	275.00
Flute Length (mm)	177.00
Spiral Type	Regular Spiral
Cutting Direction	Right Hand
Point Type	Cone Relief
Web Thinning	Web-Thinning
Drill Bit Diameter Tolerance (mm)	h8
Material Grade	M2
Series/List	257

$141.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - Document Protectors Type: Ticket Holder Width (Inch): 9

Item #: 12140927
Brand: Value Collection
Model #:

Product Specifications

Document Protectors; Type: Ticket Holder ; Width (Inch): 9 ; Height (Inch): 12 ; Number of Pieces: 25.000 ; Color: Black ; Description: 9 x 12" Magnetic Job Ticket Holders Magnetic Ticket Holders attach to any metal surface. Clear vinyl on both sides for easy visibility of documents. Convenient eyelet at top for hanging.

Type Ticket Holder

Width (Inch) 9

Height (Inch) 12

Number of Pieces 25.000

Color Black

Description 9 x 12" Magnetic Job Ticket Holders Magnetic Ticket Holders attach to any metal surface. Clear vinyl on both sides for easy visibility of documents. Convenient eyelet at top for hanging.

$138.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Zephyr Tool Group - 3/4" Cutter Capacity, 1/4-28 Steel Adjustable Stop Countersink Cage

Item #: 32243990
Brand: Zephyr Tool Group
Model #: ZT330-W

Product Specifications
Type	Countersink Cage
Thread Size	1/4-28
Cutter Capacity (Inch)	3/4
Overall Length (Inch)	3-9/16
Depth Adjustment (Decimal Inch)	0.2810
Material	Steel
Shaft Diameter (Inch)	1/4
Shaft Type	Round
PSC Code	5133

$167.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Telemecanique Sensors - 4 Pin M12 Connector, 2m Nominal Distance, Shock and Vibration Resistant, Polarized Retroreflective Photoelectric Sensor - 12 to 24 VDC, 500 Hz, Nickel Plated Brass, 2.44 Inch Long x 0.71 Inch Wide

Item #: 59759522
Brand: Telemecanique Sensors
Model #: XUB9BPANM12
Exact Tooling IR#: 04

Product Specifications
Sensor Type	Polarized Retro-reflective
Output Circuit Type	PNP
Maximum Nominal Sensing Distance (Meters)	2.00
Connector Type	4-pin M12
Voltage	12-24 VDC
Frequency Rating (Hz)	500
NEMA Rating	4X
Ingress Protection Rating	IP65; IP67
Housing Material	Nickel Plated Brass
Resistance Features	Shock Resistant; Vibration Resistant
Overall Length (mm)	62
Overall Length (Decimal Inch)	2.4400
Overall Width/Diameter (mm)	18
Overall Width/Diameter (Decimal Inch)	0.7100
Shape	Cylindrical
Maximum Operating Temperature (F)	131
Minimum Operating Temperature (F)	-13
Standards Met	CE Listed; CSA Certified; IEC 60068-2-27; IEC 60068-2-6; IEC 60529; RoHS Compliant; UL Listed

$89.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Telemecanique Sensors - 4 Pin M12 Connector, 2m Nominal Distance, Shock and Vibration Resistant, Polarized Retroreflective Photoelectric Sensor - 12 to 24 VDC, 500 Hz, Nickel Plated Brass, 2.44 Inch Long x 0.71 Inch Wide

Item #: 59759555
Brand: Telemecanique Sensors
Model #: XUB9BPBNM12
Exact Tooling IR#: 04

Product Specifications
Sensor Type	Polarized Retro-reflective
Output Circuit Type	PNP
Maximum Nominal Sensing Distance (Meters)	2.00
Connector Type	4-pin M12
Voltage	12-24 VDC
Frequency Rating (Hz)	500
NEMA Rating	4X
Ingress Protection Rating	IP65; IP67; IP69K
Housing Material	Nickel Plated Brass
Resistance Features	Shock Resistant; Vibration Resistant
Overall Length (mm)	62
Overall Length (Decimal Inch)	2.4400
Overall Width/Diameter (mm)	18
Overall Width/Diameter (Decimal Inch)	0.7100
Shape	Cylindrical
Maximum Operating Temperature (F)	131
Minimum Operating Temperature (F)	-13
Standards Met	CE Listed; CSA Certified; DIN 40050; IEC 60068-2-27; IEC 60068-2-6; IEC 60529; RoHS Compliant; UL Listed

$102.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Type	Hose Clamp Pliers
Jaw Type	Rotating Tip
Overall Length Range	9" - 11.9"
Overall Length (Inch)	9.8500
Style	Spring Hose Clamp Pliers w/Locking Device
Number of Positions	19
Jaw Length (mm)	29
Maximum Capacity (Inch)	2
Handle Material	Non-Slip Plastic Coated
Side Cutter	No

Type	Hydraulic Oil
ISO Grade	15
Composition	Mineral
Container Size Range	5 Gal. - 49.9 Gal.
Food Grade	NonFoodGrade
Series	Zurnpreem
Container Type	Pail
Container Size	5 Gal

Thread Size (mm)	MF14x1.5
Chamfer	Modified Bottoming
Class of Fit	6HX
Number of Flutes	4
Material	HSS-E-PM
Finish/Coating	ACN
Thread Direction	Right Hand
Flute Direction	Right Hand
Through Coolant	No
Overall Length (mm)	100.0000
Helix Angle	15.00
Thread Standard	MF
Oversize	No
Thread Length (mm)	21.000
Flute Type	Slow Spiral
Series/List	MTH
Tapping Depth (mm)	71.00
Shank Diameter (mm)	11.0000
Shank Length (mm)	29.000
Material Application	Super Alloys; Difficult-to-Machine Steels

Type	Ticket Holder
Width (Inch)	9
Height (Inch)	12
Number of Pieces	25.000
Color	Black
Description	9 x 12" Magnetic Job Ticket Holders Magnetic Ticket Holders attach to any metal surface. Clear vinyl on both sides for easy visibility of documents. Convenient eyelet at top for hanging.