BES Up To 2022 $100-$250 Products - (25001 Products)
ST20-SFH8-160 SHRINK FIT EXT
Item #: YG53VS314M
Manufacturer: YG-1 Cutting Tools
Mfg #: VS314M
Technical Specifications:
*Brand Name: YG-1 Cutting Tools
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ST12-SFH5-160 SHRINK FIT EXT
Item #: YG53VS112M
Manufacturer: YG-1 Cutting Tools
Mfg #: VS112M
Technical Specifications:
*Brand Name: YG-1 Cutting Tools
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ST20-SFH4-160 SHRINK FIT EXT
Item #: YG53VS311M
Manufacturer: YG-1 Cutting Tools
Mfg #: VS311M
Technical Specifications:
*Brand Name: YG-1 Cutting Tools
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ST5/8-SFH5/16-6.30 SHRINK FIT EXT
Item #: YG53VS023
Manufacturer: YG-1 Cutting Tools
Mfg #: VS023
Technical Specifications:
*Brand Name: YG-1 Cutting Tools
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78-8060-7977-4 FRONT BAR JOINT PIN
Item #: LF5374938
Manufacturer: 3M
Mfg #: 0005113574
Technical Specifications:
•Brand Name: 3M
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11.9mm Twister GP 5X 118 Degree Point 21 Degree Helix Solid Carbide Jobbers Drill DIN338
Item #: AX4124785
Manufacturer: M A Ford
Mfg #: 22446850
Technical Specifications:
•Angle: 118 Degree Standard Point
•Brand Name: M A Ford
•Coating: Uncoated
•Decimal Equivalent: .4685
•Description: Metric Size
•Drill Diameter: 11.9mm
•Flute Length: 101mm
•Helix Angle: 21 Degree
•List No.: 224
•Material: Carbide
•Overall Length: 151mm
•Trade Name: Twister® GP
•Type: Standard Jobber Drill
Description:
•21° Helix
•118° Point
•Recommended for drilling cast iron, aluminum, bronze, and magnesium alloys and other abrasive, but easily machined materials
•Designed to allow high feed rates with good chip flow
•Four facet drill point minimizes drill wander and assures accurately sized holes
•Shorter length reduces defection and vibration, increases accuracy and improves tool life
Shipping Info:
•Actual Weight - .3609
•Dimensions - Height: .551 Length: 5.90 Width: .551
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8-9 Dia. - H5 - 4 FL - HSSE - TiCN - Modified Bottoming - Spiral Flute Tap
Item #: TP282944008
Manufacturer: OSG USA, Inc.
Mfg #: 2944008
Technical Specifications:
•Brand Name: OSG USA, Inc.
•Chamfer Length: 2.5P - 3P
•Class: High Performance Taos
•Class of Fit: H5
•Coating: TiCN
•Helix Angle: 45 Degree
•List No.: 290
•Material: HSSE
•Number of Flutes: 4
•Overall Length: 4-11/16
•Size: 7/8-9
•Size Type: Inch
•Style: Spiral Flute
•Thread Length: 2-7/32
•Thread Type: UNC
•Threads Per Inch: 9
•Trade Name: HY-PRO® Taps
•Type: Spiral Flute
Description:
•OSG List No. 290
Shipping Info:
•Actual Weight - .4250
•Dimensions - Height: 1.15 Length: 4.80 Width: 1.25
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/16-14 - Helical Flute AlTiN Thread Mill - UN Thread
Item #: MT3098611
Manufacturer: Morse Cutting Tools
Mfg #: 98611
Technical Specifications:
•Brand Name: Morse Cutting Tools
•Cutter Diameter: .340
•Length of Cut: 7/8
•List No.: 5900
•Minimum Thread Size: 7/16
•Number of Flutes: 4
•Overall Length: 3
•Pitch: 14
•Shank Diameter: 3/8
•Type: Helical Flute AlTiN Coated Thread Mills- UN Threads
Description:
•Helical flute thread mills – UN threads
•Shank diameter -.0001 to -.0003" cutter diameter ±.0005" length of cut +.050 to .000" overall length ±.015" T.I.R. maximum .0005"
•Completely CNC ground
•Helical flute design for reduced cutting forces, smoother cuts, longest tool life, and maximum thread milling performance
•100% thread form; superior threads vs. tapping
•Cuts right hand and left hand high quality threads
•Suitable for all types of materials, including heat treated and difficult to machine workpieces
•Morse Cutting Tools supplied with AlTiN coating only
Shipping Info:
•Actual Weight - .1600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/16-20 - Helical Flute AlTiN Thread Mill - UN Thread
Item #: MT3098612
Manufacturer: Morse Cutting Tools
Mfg #: 98612
Technical Specifications:
•Brand Name: Morse Cutting Tools
•Cutter Diameter: .340
•Length of Cut: 7/8
•List No.: 5900
•Minimum Thread Size: 7/16
•Number of Flutes: 4
•Overall Length: 3
•Pitch: 20
•Shank Diameter: 3/8
•Type: Helical Flute AlTiN Coated Thread Mills- UN Threads
Description:
•Helical flute thread mills – UN threads
•Shank diameter -.0001 to -.0003" cutter diameter ±.0005" length of cut +.050 to .000" overall length ±.015" T.I.R. maximum .0005"
•Completely CNC ground
•Helical flute design for reduced cutting forces, smoother cuts, longest tool life, and maximum thread milling performance
•100% thread form; superior threads vs. tapping
•Cuts right hand and left hand high quality threads
•Suitable for all types of materials, including heat treated and difficult to machine workpieces
•Morse Cutting Tools supplied with AlTiN coating only
Shipping Info:
•Actual Weight - .1000
•Dimensions - Height: .700 Length: 3.40 Width: .700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.438" Min - .375" SH - 6" OAL - Carbide Shank Boring Bar
Item #: FG70CG6900
Manufacturer: Everede Tool
Mfg #: CG6900
Technical Specifications:
•Bar Diameter: SS
•Brand Name: Everede Tool
•Degree: 5
•Grade: Carbide
•Insert Style: WCGT-2xx
•Minimum Bore: .438
•Overall Length: 6.00
•Shank Diameter: .375
•Style: 1 Flat
•Type: Carbide Boring Bars
Description:
•Free cutting action due to positive rake angle
•Use solid carbide shank tools are available where vibration and chattering is a problem
•Uses CDCD type inserts
Shipping Info:
•Actual Weight - .3750
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
PRM Pro 10 lb. Brass Hammer with 32" Fiberglass Handle
Item #: KY401010
Manufacturer: PRM Pro
Mfg #: :
Technical Specifications:
•Approx Head Diameter: 2-1/2
•Approximate Handle Length: 32
•Brand Name: PRM Pro
•Handle: Fiberglass
•Overall Length: 36
•Type: Brass
•Weight: 10 lbs
Description:
•Non-marring - helps absorb impact and helps reduce work damage where surface protection is critical
•Non-sparking - for safe use near combustible materials
•Fiberglass handle provides exceptional breaking resistance to overstrikes and are ergonomically designed to help prevent injury from repeated use
•Cushion grips provide a non-slip grip and maximum comfort while striking
•Made in USA
Shipping Info:
•Actual Weight - 12.6000
•Dimensions - Height: 2.50 Length: 35.7 Width: 5.75
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
24mm Opening - "Y" Drive - Box End 10° - Pre-Set Torque Head
Item #: KL45TCQYXBM24A
Manufacturer: CDI
Mfg #: 9936844
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Description: Drive Head for Pre-Set Torque Wrench
•Drive: Y-(0.560)
•Metric: 24
•Type: Box End Offset 10°
Description:
Shipping Info:
•Actual Weight - .0002
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3500 - General Purpose Synthetic Coolant - 5 Gallon
Item #: LK70A350005
Manufacturer: Ashburn
Mfg #: A-3500-05
Technical Specifications:
•Brand Name: Ashburn
•Class: Machining Fluids
•Hazard Code: HAZ58
•Size: 5 Gallon
•Type: Coolant
Description:
•Synthetic coolant
•Excellent sump life
•Excellent corrosion protection
•Non-foaming
•Transparent
•Does not contain phosphorous, sulfur, chlorine, or other halogens
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 47.4000
•Dimensions - Height: 15.5 Length: 12.5 Width: 12.5
•Addl Fee Under 70lb - $14.25 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/16 x 3/8 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458909
Manufacturer: Starrett
Mfg #: 58909
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 1/16
*Width: 3/8
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - .2400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3410SD_FC18 R.0350.625 SE
Item #: FT8534103
Brand: Fullerton Tool
Model #: 34103
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Corner Radius (RE) | 0.035″ |
| Overall Length (OAL) | 4″ |
| Tool Type | Center Cut|Single-End |
| Cutting Edge Material | Carbide |
| Length Group | Regular |
| Coating | FC18 |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 5 |
| Decimal Equivalent | 0.625″ |
| Flute Helix Angle (FHA) | 40 Degrees |
| Series/List # | 3410 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12.4 mm Dia. × 14 mm Shank × 60 mm Flute Length × 107 mm OAL, 3xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH406124
Brand: YG-1 Cutting Tools
Model #: DH406124
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 12.4 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.4882″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 12.4 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 3xD |
| Length Group | 3xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH406 |
| Applicable Material | Steel |
| Usable Length (LU) | 60 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 60 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 107 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12.6 mm Dia. × 14 mm Shank × 60 mm Flute Length × 107 mm OAL, 3xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH406126
Brand: YG-1 Cutting Tools
Model #: DH406126
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 12.6 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.4961″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 12.6 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 3xD |
| Length Group | 3xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH406 |
| Applicable Material | Steel |
| Usable Length (LU) | 60 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 60 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 107 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.7 mm Dia. × 14 mm Shank × 60 mm Flute Length × 107 mm OAL, 3xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH406137
Brand: YG-1 Cutting Tools
Model #: DH406137
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.7 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.5394″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.7 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 3xD |
| Length Group | 3xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH406 |
| Applicable Material | Steel |
| Usable Length (LU) | 60 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 60 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 107 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.6 mm Dia. × 14 mm Shank × 60 mm Flute Length × 107 mm OAL, 3xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH406136
Brand: YG-1 Cutting Tools
Model #: DH406136
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.6 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.5354″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.6 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 3xD |
| Length Group | 3xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH406 |
| Applicable Material | Steel |
| Usable Length (LU) | 60 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 60 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 107 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.3 mm Dia. × 14 mm Shank × 60 mm Flute Length × 107 mm OAL, 3xD, 140°, TiAlN, 2 Flute, Coolant Thru, Straight Solid Carbide Drill
Item #: YG14DH406133
Brand: YG-1 Cutting Tools
Model #: DH406133
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.3 mm |
| Shank Type | Cylindrical |
| Decimal Equivalent | 0.5236″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.3 mm |
| Tool Type | Carbide Dream Drill w/Coolant - 3xD |
| Length Group | 3xD |
| Measurement Type | Metric |
| Coating | TiAlN |
| Series/List # | DH406 |
| Applicable Material | Steel |
| Usable Length (LU) | 60 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Length Chip Flute (LCF) | 60 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 107 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Flute Helix Angle (FHA) | 30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It