BES Up To 2022 $100-$250 Products - (25001 Products)
4 x 7/8 x 1-1/4 - HSS - Straight Side Tooth Side Milling Cutter - 24T - TiN Coated
Item #: KE1005571
Manufacturer: Keo Milling
Mfg #: 05571
Technical Specifications:
•Brand Name: Keo Milling
•Coating: TiN
•Cutter Diameter: 4
•Face Width: 7/8
•Hole Size: 1-1/4
•Material: High Speed Steel
•Number of Teeth: 24
•Tooth Type: Straight
Description:
•For general purpose use
•Excellent for thin-walled parts, interrupted cuts or finish requirements
•Keo Milling "B" Style
Shipping Info:
•Actual Weight - 2.0500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
4 x 7/8 x 1 - HSS - Straight Side Tooth Side Milling Cutter - 24T - TiN Coated
Item #: KE1005561
Manufacturer: Keo Milling
Mfg #: 05561
Technical Specifications:
•Brand Name: Keo Milling
•Coating: TiN
•Cutter Diameter: 4
•Face Width: 7/8
•Hole Size: 1
•Material: High Speed Steel
•Number of Teeth: 24
•Tooth Type: Straight
Description:
•For general purpose use
•Excellent for thin-walled parts, interrupted cuts or finish requirements
•Keo Milling "B" Style
Shipping Info:
•Actual Weight - 2.2100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MULTI-MAST OSCILL TL KT
Item #: PD20DWE315K
Manufacturer: DeWALT
Mfg #: DWE315K
Technical Specifications:
Description:
Shipping Info:
•Actual Weight - 7.2500
•Dimensions - Height: 9.75 Length: 17.2 Width: 5.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5 Gallon STAGES™ Whamex ™ Machine Tool Sump and System Cleaner
Item #: MS655710
Manufacturer: Master Fluid Solutions
Mfg #: WHAMEX/5G
Technical Specifications:
•Brand Name: Master Fluid Solutions
•Hazard Code: HAZ58
•Size: 5 Gallon
Description:
•Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach
•Very hard water tolerant allowing it to be effective in raw water or used coolant
•Compatible with most waste treatment (including ultrafiltration) and will not degrade when used as directed
•Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
•Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 45.0700
•Dimensions - Height: 1.00 Length: 1.00 Width: 1.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12X1X3 32AR46A-HV40 A/O WHEEL
Item #: MG3727361
Manufacturer: Carborundum
Mfg #: 0553952736
Technical Specifications:
*Brand Name: Carborundum
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tru-Tap V-Flange Adaptor 1" Bore - #15140; CAT40
Item #: GH5015140
Manufacturer: Procunier
Mfg #: 15140
Technical Specifications:
*Brand Name: Procunier
*Description: CAT 40 Short Proj. 1" Bore
*Model Number: 15140
*Shank Size: CAT40
*Type: Tru-Tap V-Flange Adaptors 1" Bore
Description:
*For use with "E" Style & TRU-TAP Quick Change Style Collets
*Instantaneous reverse without reversing machine motor
*Eliminate no tap overtravel, excellent for blind or shallow holes
*Accurate depth repeatability within 1/3 turn
Shipping Info:
*Actual Weight - 2.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-7/8 Size 4 Rigid Tapping Collet
Item #: TE1260144476C
Manufacturer: Techniks
Mfg #: 60/14-4476
Technical Specifications:
*Brand Name: Techniks
*Collet Sizes: Size 4
*Coolant Thru: No
*OD: 3.27
*Shank Size: 1.520
*Square: 1.139
*Style: ANSI
*Tap Size: 1-7/8
*Type: Rigid
Description:
*Techniks Rigid Tap Collets pair with tapping holders offer superior tapping capability
*They offer Quick-Change capability to change worn taps in seconds
*
Shipping Info:
*Actual Weight - 3.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-7/16 1-1/2 Size 4 Rigid Tapping Collet
Item #: TE1260144381C
Manufacturer: Techniks
Mfg #: 60/14-4381
Technical Specifications:
*Brand Name: Techniks
*Collet Sizes: Size 4
*Coolant Thru: No
*OD: 3.27
*Shank Size: 1.233
*Square: .925
*Style: ANSI
*Tap Size: 1-1/2, 1-7/16, M36
*Type: Rigid
Description:
*Techniks Rigid Tap Collets pair with tapping holders offer superior tapping capability
*They offer Quick-Change capability to change worn taps in seconds
*
Shipping Info:
*Actual Weight - 3.8000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1 7/8 TAP ADPT NUMERTAP 6000
Item #: GM956187
Manufacturer: Parlec
Mfg #: 6-187
Technical Specifications:
*Brand Name: Parlec
Description:
Shipping Info:
*Actual Weight - .0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-3/4 Size 4 Rigid Tapping Collet
Item #: TE1260144444C
Manufacturer: Techniks
Mfg #: 60/14-4444
Technical Specifications:
*Brand Name: Techniks
*Collet Sizes: Size 4
*Coolant Thru: No
*OD: 3.27
*Shank Size: 1.430
*Square: 1.072
*Style: ANSI
*Tap Size: 1-3/4, M42
*Type: Rigid
Description:
*Techniks Rigid Tap Collets pair with tapping holders offer superior tapping capability
*They offer Quick-Change capability to change worn taps in seconds
*
Shipping Info:
*Actual Weight - 3.6000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1 5/8 TAP ADPT NUMERTAP 6000
Item #: GM956162
Manufacturer: Parlec
Mfg #: 6-162
Technical Specifications:
*Brand Name: Parlec
Description:
Shipping Info:
*Actual Weight - .0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4 x 1-1/4 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657625
Manufacturer: Starrett
Mfg #: 57625
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 3/4
*Width: 1-1/4
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 4.7800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/32 x 5 - Oversize Air Hardening Flat Stock
Item #: LY751013
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 5/32
*Width: 5
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 8.7200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
316 Stainless Steel Plain Pattern Nut Eye Bolt - 1-1/4-7 Thread; 2-3/16" Eye Dia.
Item #: SF50N201231612
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Eye Diameter: 2-3/16
*Eye O.D.: 4-7/16
*Material: 316 Stainless
*Safe Workload: 13500 lbs
*Shank Length: 12
*Style: Nut Eye Bolt Plain Pattern
*Thread Length: 4
*Thread Size: 1-1/4-7
Description:
*Drop Forged 316 Stainless Steel
*Passivated & Electro polished
*Threaded Eyebolt Includes One Stainless Steel Hex Nut Assembled
Shipping Info:
*Actual Weight - 7.7200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
15286 2X3/4X1-5/8X3-7/8
Item #: CR1015286
Brand: Melin Tool Co
Model #: 15286
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2″ |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Tool Type | General Purpose |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Decimal Equivalent | 2″ |
| Overall Length (OAL) | 3-7/8″ |
| Series/List # | A |
| Cutting Edge Material | HSS M42 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M 4-6HX VHM REK.1A-HCUT/C
Item #: ER4511761
Brand: EMUGE-FRANKEN
Model #: B010K101.0040
| Product Specifications | |
|---|---|
| Thread Diameter Size (TDZ) | M4 |
| Standard | DIN |
| Thread Pitch (TP) | 0.7 mm |
| Tool Type | Rekord A-HCUT |
| Thread Standard | Metric |
| Chamfer | 2P-3P |
| Overall Length (OAL) | 63 mm |
| Coating | TiCN |
| Usable Length (LU) | 20 mm |
| Flute Type | Straight |
| Connection Diameter Machine Side (DCONMS) | 4.5 mm |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 4 |
| Coolant Supply Property (CSP) | External |
| Flute Helix Angle (FHA) | 0 Degrees |
| Measurement Type | Metric |
| Applicable Material | Hard Materials |
| Series/List # | 010K101 |
| Cutting Edge Material | Carbide |
| Thread Size | M4 × 0.7 |
| Thread Tolerance Class (TCTR) | 6HX |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12MM EM TOP-CUT-BN-4FL
Item #: ER452502A012
Brand: EMUGE-FRANKEN
Model #: 2502A.012
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 12 mm |
| Usable Length (LU) | 24 mm |
| Connection Diameter Machine Side (DCONMS) | 12 mm |
| Tool Type | Top-Cut |
| Overall Length (OAL) | 83 mm |
| Length Group | Standard |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | AlTiN |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 35 Degrees |
| Series/List # | 2502A |
| Shank Type | HA |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3446.04020B BN TPR EM
Item #: ER45344604020B
Brand: EMUGE-FRANKEN
Model #: 3446.04020B
| Product Specifications | |
|---|---|
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Coating | Bright |
| Cutting Diameter (DC) | 5.83 mm |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 30 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| End Shape | Taper Ball Nose |
| Corner Radius (RE) | 2 mm |
| Shank Type | HA |
| Overall Length (OAL) | 72 mm |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Style | Finisher |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Tool Type | Taper Ball 6° |
| Body Half Taper Angle (BHTA) | 4 Degrees |
| Series/List # | 3446 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/16″ × 1/2″ × 7/8″ × 4″ RHS / RHC Solid Carbide 2-Flute Square End General Purpose End Mill - TiAlN
Item #: CE60C80184
Brand: Cleveland
Model #: C80184
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Length Group | Regular |
| Depth of Cut Maximum (APMX) | 7/8″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.4375″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Series/List # | CEM-DE-2-TA |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Double End |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3440L.06010B BN TPR EM
Item #: ER453440L06010B
Brand: EMUGE-FRANKEN
Model #: 3440L.06010B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1 mm |
| Cutting Edge Material | Carbide |
| Depth of Cut Maximum (APMX) | 29 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 3 |
| End Shape | Taper Ball Nose |
| Corner Radius (RE) | 1 mm |
| Shank Type | HA |
| Overall Length (OAL) | 72 mm |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 45 Degrees |
| Style | Finisher |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Tool Type | Taper Ball 6° |
| Body Half Taper Angle (BHTA) | 6 Degrees |
| Series/List # | 3440L |
| Coating | AlCr |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It