.005mm Resolution - Electronic Internal Caliper Gage

Item #: NA5554554611
Manufacturer: Fowler
Mfg #: 54-554-611

Technical Specifications:
•Brand Name: Fowler •Model Number: 54-554-611 •Resolution: .0002 / .005mm •Total Opening Range: .200 - .590 / 5 - 15mm •Type: Electronic Internal Caliper Gage

Description:
•Easy to hold •RS232 output •Rugged housing •Large LCD display •Accuracy .0008"/ .02mm •Preset capability •Direct inch/metric conversion •Absolute/incremental measurements •High-impact, aircraft aluminum case

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 1.6000 •Dimensions - Height: 2.30 Length: 9.10 Width: 6.90 •Additional handling -$15.00 per item

$217.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#54-554-711 - 0 - .400 / 0 - 10mm Range - .0005 / .02mm Resolution - Electronic External Caliper Gage

Item #: NA5554554711
Manufacturer: Fowler
Mfg #: 54-554-711

Technical Specifications:
•Brand Name: Fowler •Model Number: 54-554-711 •Resolution: .0005 / .02mm •Total Opening Range: 0 - .400 / 0 - 10mm •Type: Electronic External Caliper Gage

Description:
•Easy to hold •RS232 output •Rugged housing •Large LCD display •Accuracy .0008"/ .02mm •Preset capability •Direct inch/metric conversion •Absolute/incremental measurements •High-impact, aircraft aluminum case

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 1.0000 •Additional handling -$15.00 per item

$245.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Submersible Parts Washer Pump

Item #: NX501YS
Manufacturer: Little Giant
Mfg #: 501020

Technical Specifications:
•Amps: 1.1 •Brand Name: Little Giant •Description: Cast aluminum housing, 1/4" MNPT discharge, and 6' cord with Master Builders Fitting. •Flow: 1'-205 / 3'-168 / 5'-120 GPH •Horse Power: 1/150 •Shut Off: 7.4 ft •Type: Pump •Volt: 115 •Watts: 70

Description:
•Submerged use only in parts washers •Cast aluminum housing •1/4" MNPT discharge •Conduit fitting for mounting •Nylon volute and impeller •Triple lip Viton® shaft seal •For use with UL (PJQU) solvents •Thermally protected

Shipping Info:
•Actual Weight - 3.2500 •Dimensions - Height: 4.70 Length: 6.40 Width: 6.30

$228.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Replacement Pump For 2MC5

Item #: NX50NK2
Manufacturer: Little Giant
Mfg #: 527003

Technical Specifications:
•Amps: 1.7 •Brand Name: Little Giant •Flow: 1'-325 / 3'-300 / 5'-270 / 10'-130 GPH •Horse Power: 1/40 •Shut Off: 12.3 •Size: 4-9/16 x 4-1/8 (D) •Type: Pump •Volt: 100 •Watts: 100

Description:
•Corrosion resistant nylon body •Oil filled motor •12.3' maximum lift •1/4" MNPT discarge •Nylon volute and impeller •Viton® shaft seal •Thermal overload protection •For submersible use only

Shipping Info:
•Actual Weight - 4.2000 •Dimensions - Height: 5.50 Length: 6.80 Width: 7.50

$276.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hard Solid OD Jaws for 6" 3-Jaw Bison Scroll Chuck- 3 Piece Set

Item #: HK30880306
Manufacturer: Bison
Mfg #: 7-880-306

Technical Specifications:
*Brand Name: Bison *Class: Lathe Chucks & Accessories *For Chuck Size: 6 *Type: Set of 3 Solid Jaws *Weight: 2.4 lbs

Description:
*OD Hard Solid Jaws for 3-Jaw Chucks *Sold in sets

Shipping Info:
*Actual Weight - 2.6000 *Dimensions - Height: 2.40 Length: 3.70 Width: 3.40

$249.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1-1/4"-4.0" - Face Mill Arbor

Item #: TE12227154
Manufacturer: Techniks
Mfg #: 22715-4

Technical Specifications:
*Arbor Thread: 5/8-18UNF *Brand Name: Techniks *Coolant Supply: Coolant-thru Spindle *Flange Diameter: 2.5 *Gage Length: 4.00 *Key Size: .5 *Pilot Diameter: 1-1/4 *Pilot Length: .69 *Shank: CAT40 *Type: Precision CAT Face Mill Arbor

Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life *Each arbor is lab certified for dimensional accuracy *The taper is ground to AT3 tolerance for maximum spindle contact

Shipping Info:
*Actual Weight - 5.8000

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 22MM SHELL MILL HOLDER

Item #: GM73C500122
Manufacturer: Lyndex
Mfg #: C5001-22-6

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - 7.3500 *Dimensions - Height: 4.90 Length: 9.80 Width: 4.80

$239.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1"-6.0" - Face Mill Arbor

Item #: TE12227136
Manufacturer: Techniks
Mfg #: 22713-6

Technical Specifications:
*Arbor Thread: 1/2-20UNF *Brand Name: Techniks *Coolant Supply: Coolant-thru Spindle *Flange Diameter: 2.5 *Gage Length: 6.00 *Key Size: .38 *Pilot Diameter: 1 *Pilot Length: .69 *Shank: CAT40 *Type: Precision CAT Face Mill Arbor

Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life *Each arbor is lab certified for dimensional accuracy *The taper is ground to AT3 tolerance for maximum spindle contact

Shipping Info:
*Actual Weight - 7.2000 *Dimensions - Height: 2.48 Length: 10.0 Width: 3.00

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/4"-6.0" - Face Mill Arbor

Item #: TE12227116
Manufacturer: Techniks
Mfg #: 22711-6

Technical Specifications:
*Arbor Thread: 3/8-24UNF *Brand Name: Techniks *Coolant Supply: Coolant-thru Spindle *Flange Diameter: 2.5 *Gage Length: 6.00 *Key Size: .31 *Pilot Diameter: 3/4 *Pilot Length: .69 *Shank: CAT40 *Type: Precision CAT Face Mill Arbor

Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life *Each arbor is lab certified for dimensional accuracy *The taper is ground to AT3 tolerance for maximum spindle contact

Shipping Info:
*Actual Weight - 5.3000 *Dimensions - Height: 2.80 Length: 10.6 Width: 2.90

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 SLN 1/4-4 - End Mill Holder with Coolblast

Item #: TE1222931B
Manufacturer: Techniks
Mfg #: 22931B

Technical Specifications:
*Bore: 1/4 *Bore ID: 1/4" *Brand Name: Techniks *Coolant Supply: Thru-Spindle and In-The-Bore Delivery *Gage Length: 4.000 *Nose: .780 *Shank: CAT50 *Size: 1/4 *Style: Single-Ended *Type: CoolBLAST

Description:
*CoolBLAST End Mill Holders blast coolant directly on the tool path, eliminating the need for expensive coolant-thru tool holders *Techniks End Mills offer an Industry Leading H5 tolerance precision bore and are individually lab tested to ensure quality

Shipping Info:
*Actual Weight - .4625

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 SLN 3/8-4 - End Mill Holder with Coolblast

Item #: TE1222935B
Manufacturer: Techniks
Mfg #: 22935B

Technical Specifications:
*Bore: 3/8 *Bore ID: 3/8" *Brand Name: Techniks *Coolant Supply: Thru-Spindle and In-The-Bore Delivery *Gage Length: 4.000 *Nose: 1.000 *Shank: CAT50 *Size: 3/8 *Style: Single-Ended *Type: CoolBLAST

Description:
*CoolBLAST End Mill Holders blast coolant directly on the tool path, eliminating the need for expensive coolant-thru tool holders *Techniks End Mills offer an Industry Leading H5 tolerance precision bore and are individually lab tested to ensure quality

Shipping Info:
*Actual Weight - .4812

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 SLN 25mm-4 - End Mill Holder

Item #: TE1222993
Manufacturer: Techniks
Mfg #: 22993

Technical Specifications:
*Bore: 25mm *Bore ID: 25mm *Brand Name: Techniks *Coolant Supply: Thru-Spindle *Gage Length: 4.000 *Nose: 65mm *Shank: CAT50 *Size: 25mm *Style: Single-Ended *Type: Precision End Mill Holder

Description:
*Techniks End Mill Holders are precision machined to an Industry Leading H5 standard I.D. hole tolerance *Techniks End Mills are balanced to 15,000 RPM at G6.3 tolerance to save spindle bearing life and the Taper is ground to AT3 standard for maximum spindle contact *Each holder is lab certified with an individual report to ensure quality

Shipping Info:
*Actual Weight - .6187

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 5MT MORSE TAPER HOLDER

Item #: GM73C50040005
Manufacturer: Lyndex
Mfg #: C5004-0005

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$250.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 x ER11M-150mm w/ Mini Nut - Collet Chuck

Item #: TE1216324
Manufacturer: Techniks
Mfg #: 16324

Technical Specifications:
*Brand Name: Techniks *Capacity: ER11M *Chuck Size: BT40 *Collets Included: No *Coolant Supply: Coolant-thru Spindle with Coolant Capable Retention Knob, sold separately *Head Length/Projection: 150mm *Model Number: 16324 *Mount: BT40 *Nut Diameter: 0.63 *Overall Length: 14.38 *Size/Range: .019 - .281 *Spindle Interface: BT40 *Weight: 2.6 lbs *Wrench Number: TE1204621

Description:
*Techniks Collet Chucks are balanced to 25,000 RPM at G2.5 tolerance *They are individually lab tested for accuracy and balance and come with their individual performance report *Techniks holders achieve 0.0001" or less T.I.R. as measured from the taper to the collet pocket *

Shipping Info:
*Actual Weight - 2.6000 *Dimensions - Height: 9.00 Length: 3.00 Width: 3.00

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 x ER20-70 w/ Coolflex - Collet Chuck

Item #: TE1216159F
Manufacturer: Techniks
Mfg #: 16159F

Technical Specifications:
*Brand Name: Techniks *Capacity: ER20 *Chuck Size: BT40 *Collets Included: No *Coolant Supply: Coolant-thru Flange (DIN B) or thru Spindle with Coolant Capable Rentention Knob, sold separately *Head Length/Projection: 70mm *Model Number: 16159F *Mount: BT40 *Nut Diameter: 1.34 *Overall Length: 8.08 *Size/Range: .019 - .551 *Spindle Interface: BT40 *Weight: 2.7 lbs *Wrench Number: TE1204610

Description:
*Techniks Precision CoolFLEX Collet Chuck holders Holders offer coolant capability either through the spindle or through the flange (DIN B * Simply remove two stop screws for DIN B *The holder is balanced to 25,000 RPM at G2.5 and achieves T.I.R. of 0.0001" or better from taper to collet pocket *Each holder is Techniks Certified for accuracy and balance and comes with a complete lab report *

Shipping Info:
*Actual Weight - 2.7000 *Dimensions - Height: 6.00 Length: 3.00 Width: 3.00

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 x ER20-150 w/ Coolflex - Collet Chuck

Item #: TE1216167F
Manufacturer: Techniks
Mfg #: 16167F

Technical Specifications:
*Brand Name: Techniks *Capacity: ER20 *Chuck Size: BT40 *Collets Included: No *Coolant Supply: Coolant-thru Flange (DIN B) or thru Spindle with Coolant Capable Rentention Knob, sold separately *Head Length/Projection: 150mm *Model Number: 16167F *Mount: BT40 *Nut Diameter: 1.34 *Overall Length: 14.38 *Size/Range: .019 - .551 *Spindle Interface: BT40 *Weight: 3.968 lbs *Wrench Number: TE1204610

Description:
*Techniks Precision CoolFLEX Collet Chuck holders Holders offer coolant capability either through the spindle or through the flange (DIN B * Simply remove two stop screws for DIN B *The holder is balanced to 25,000 RPM at G2.5 and achieves T.I.R. of 0.0001" or better from taper to collet pocket *Each holder is Techniks Certified for accuracy and balance and comes with a complete lab report *

Shipping Info:
*Actual Weight - 3.9700 *Dimensions - Height: 9.00 Length: 3.00 Width: 3.00

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 x ER16-70 w/ Coolflex - Collet Chuck

Item #: TE1216151F
Manufacturer: Techniks
Mfg #: 16151F

Technical Specifications:
*Brand Name: Techniks *Capacity: ER16 *Chuck Size: BT40 *Collets Included: No *Coolant Supply: Coolant-thru Flange (DIN B) or thru Spindle with Coolant Capable Rentention Knob, sold separately *Head Length/Projection: 70mm *Model Number: 16151F *Mount: BT40 *Nut Diameter: 1.08 *Overall Length: 8.08 *Size/Range: .019 - .413 *Spindle Interface: BT40 *Weight: 2.6 lbs *Wrench Number: TE1204609

Description:
*Techniks Precision CoolFLEX Collet Chuck holders Holders offer coolant capability either through the spindle or through the flange (DIN B * Simply remove two stop screws for DIN B *The holder is balanced to 25,000 RPM at G2.5 and achieves T.I.R. of 0.0001" or better from taper to collet pocket *Each holder is Techniks Certified for accuracy and balance and comes with a complete lab report *

Shipping Info:
*Actual Weight - 2.6000 *Dimensions - Height: 6.00 Length: 3.00 Width: 3.00

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

4MT Quick Pt BN - Point Only for Pt Live Center

Item #: HK2291044
Manufacturer: Riten
Mfg #: 91044

Technical Specifications:
*Brand Name: Riten *Dimension F: 1 *Mount: 4 MT *Neck Width: .591 *Point Diameter: 2-1/4 *Point Length: 1-9/16 *Point Style: BN *Shank Length: 1-3/16 *Style: Replacement Quick Point *Type: Point Only for Quick Change Point Live Center

Description:
*Replacement Quick Point

Shipping Info:
*Actual Weight - 1.2500

$281.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

2MT Full Pipe Nose - Dead Center

Item #: HK2266102
Manufacturer: Riten
Mfg #: 66102

Technical Specifications:
*Accuracy: .0001 *Brand Name: Riten *Description: Morse Taper *Head Length: 2.840 *Mount: 2 MT *Neck Width: 1/2 *Point Diameter: 2-1/8 *Point Length: 1.84 *Point Style: Pipe Nose *Style: Full *Type: Dead Centers

Description:
*Morse Taper Pipe Nose Dead Center *Accuracy guaranteed to .0001 TIR *Through-hardened to 61-63 Rc. *Riten full service, repair, and guarantee apply

Shipping Info:
*Actual Weight - 1.5000 *Dimensions - Height: 2.40 Length: 7.30 Width: 2.40

$281.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 to MT5 Adaptor-4.10"

Item #: TE1222629
Manufacturer: Techniks
Mfg #: 22629

Technical Specifications:
*Brand Name: Techniks *Gage Length: 4.1300 *Inside Taper: 5MT *Nose: 2.48 *Outside Diameter: 3.875 *Outside Taper: CAT50 *Type: Morse Taper to CAT V-Flange Adaptor

Description:
*CAT V-Flange Morse Taper Adapter *Taper ground to AT3 accuracy or better *.0002" runout from taper to tool pocket *Each holder lab certified for accuracy

Shipping Info:
*Actual Weight - 7.5500 *Dimensions - Height: 4.50 Length: 9.50 Width: 4.70

$228.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It